RING FUNCTION 7
‘Smart-Ring
The ring function has an answer back feature. This allows you to confirm whether or not a call has reached the receiving party even if the operator is temporarily away from the transceiver.
qSet the same group channel number for
all of your group transceivers. (See left.) w While pushing [PTT], push [UP]/[Y] .
• A beep is emitted and “ 
” blinks on the display.
e Release the [PTT].
• When a member of your group an- | UP | MODE |
|
| |
swers your call, the transceiver emits | DOWN |
|
beep tones for 10 sec. and blinks “ ”. |
|
|
• When no answer comes back, the |
|
|
transceiver emits short faint beep tones. |
|
|
rPush [PTT] to answer and to stop the beeps and flashing.
NOTE: This function is available only when the called station has set the same group number and the same operating chan- nels as you.
‘Call-Ring
Sends the ring tones during transmit mode.
➥While pushing [PTT], push [DOWN]/[Z] to send a ring tone.
•The ring tone is emitted while pushing [DOWN]/[Z].
•The microphone signal is automati- cally cut while pushing [DOWN]/[Z].
POWER
UP | MODE |
DOWN |
|
14