Icom IC-4008E ‘ Battery pack charging, ‘ Charging precautions, ‘ About the battery pack

Page 11

BATTERY PACKS 3

Battery pack charging

The optional BP-202 BATTERY PACK includes rechargeable Ni-Cd batteries and can be charged approx. 300 times. Charge the battery pack before first operating the transceiver or when the battery pack becomes exhausted.

If you want to be able to charge the battery pack more than 300 times, the following points should be observed:

1.Avoid overcharging. The charging period should be less than 48 hours.

2.Use the battery until it becomes almost completely exhausted under normal conditions. We recommend battery charging just after transmitting becomes impossible.

Charging precautions

NEVER attempt to charge dry cell batteries. This will cause inter- nal liquid leakage and damage the battery case and transceiver.

Recommended temperature range for charging: + 10˚C to + 40˚C (or + 50˚F to +104˚F).

About the battery pack

DOperating period

Depending on the attached battery pack, the operating period of the transceiver varies. Refer to p. 7 for operating period details.

DBattery pack life

If your battery pack seems to have no capacity even after being fully charged, completely discharge it by leaving the power ON all day. Then, fully charge the battery pack again.

If the battery pack still does not retain a charge (or very little), a new battery pack must be purchased.

6

Image 11
Contents I4008E Foreword Supplied Accessories Page Table of Contents Panel Description ‘ Switches, controls, keys and connectors0VOLUME Control VOL ‘ Function display Answer Back Indicator see pBelt clip Accessories‘ Accessory attachment Antenna‘ Installing batteries in the battery case Battery Packs‘ About the battery pack ‘ Battery pack charging‘ Charging precautions Rapid charging with the BC-119L/BC-119+AD-89 ‘ Charging connectionsBasic Operation ‘ Power on‘ Adjusting the volume ‘ Selecting the operating channel Receive and Transmit ‘ Setting the group code Group Mode CtcssCtcss Continuous Tone Coded Squelch System Freq Ctcss code table‘ Call-Ring Ring Function‘ Smart-Ring Ring tone type ‘ Initial set modeAuto power OFF Other FunctionsLock function PTT hold function‘ ATS Automatic Transponder System ‘ Low battery indicator‘ LCD backlight ‘ Auto power save‘ Resetting the transceiver ‘ Optional HM-75A functions Switch NormalGeneral SpecificationsSpeaker-microphones Battery packsOptions ChargersChannel frequency list Memo‘ Channel number and group number Memo Memo 12 CE 0560 Count on us