Icom IC-4008E instruction manual 0VOLUME Control VOL

Page 7

PANEL DESCRIPTION 1

qANTENNA

Extend the antenna completely when using the transceiver.

The antenna collapses completely into the transceiver body for car- rying purposes.

The antenna can be adjusted 90 degrees from the regular position when operating the transceiver in a horizontal position.

w PTT SWITCH [PTT]

Push and hold to transmit; release to receive.

While pushing [PTT], push [POWER] to activate the “PTT hold func- tion”. (p. 16)

e CHANNEL UP SWITCH [UP]/[Y]

Push to increment the operating channel.

Push and hold to increment the operating channel continuously.

rCHANNEL DOWN SWITCH [DOWN]/[Z]

Push to decrement the operating channel.

Push and hold to decrement the operating channel continuously.

tSPEAKER

y MICROPHONE [MIC] u MODE SWITCH [MODE]

Push to toggle between Group mode and Normal mode. (p. 11)

Push and hold for 1 sec. to force the squelch open; push and hold for 1 sec. to close it again. (p. 8)

iPOWER SWITCH [POWER]

Push to turn the power ON.

Push and hold this key to toggle the key lock function ON/OFF. (p. 16)

o FUNCTION DISPLAY (p. 3)

!0VOLUME CONTROL [VOL]

Rotate clockwise to increase and counterclockwise to decrease volume.

!1EXTERNAL SPEAKER AND MICROPHONE JACKS

Connect an optional speaker-microphone or headset, if desired.

2

Image 7
Contents I4008E Foreword Supplied Accessories Page Table of Contents Panel Description ‘ Switches, controls, keys and connectors0VOLUME Control VOL ‘ Function display Answer Back Indicator see pBelt clip Accessories‘ Accessory attachment Antenna‘ Installing batteries in the battery case Battery Packs‘ Charging precautions ‘ Battery pack charging‘ About the battery pack Rapid charging with the BC-119L/BC-119+AD-89 ‘ Charging connections‘ Adjusting the volume ‘ Power onBasic Operation ‘ Selecting the operating channel Receive and Transmit ‘ Setting the group code Group Mode CtcssCtcss Continuous Tone Coded Squelch System Freq Ctcss code table‘ Smart-Ring Ring Function‘ Call-Ring Ring tone type ‘ Initial set modeAuto power OFF Other FunctionsLock function PTT hold function‘ ATS Automatic Transponder System ‘ Low battery indicator‘ Resetting the transceiver ‘ Auto power save‘ LCD backlight ‘ Optional HM-75A functions Switch NormalGeneral SpecificationsSpeaker-microphones Battery packsOptions Chargers‘ Channel number and group number MemoChannel frequency list Memo Memo 12 CE 0560 Count on us