StarTech.com NETRS2321P manual Broadcast Search

Page 9

Broadcast Search

The Broadcast Search function is used to locate all NETRS2321P devices that are connected to the same LAN as your computer. Since the Broadcast Search function searches by MAC address and not IP address, all NETRS2321P connected to the LAN will be located, regardless of whether or not they are part of the same subnet as the host.

NOTE: Broadcast packet packets are not passed through a router. The VCom utility can only be used to monitor devices in the same segment of the LAN.

NETRS2321P

Instruction Manual

Image 9

Contents Port RS232 Serial over IP Ethernet Device Server FCC Compliance Statement Table of Contents Product Applications Top View Product OverviewFront View Rear ViewLED Indicators Load Default Settings / System Reset ButtonLoad Default Settings System ResetRS-232 DB9 Male Pin Assignment RJ45 Ethernet Pin AssignmentsPackaging Contents InstallationIntroduction Web Browser MethodBroadcast Search Administrator AuthenticationWeb Console Operation System Status System IPLoad default setting Firmware updateWeb Telnet Server / Client TCP ModeClient mode inactive timeout CLI ModeServer mode protect timeout Reverse TelnetMode UDP ModeLocal Port Remote AddressCharacter Bits Baud rateParity Type Stop BitHardware Flow Control Reset DeviceUart Memory Overflow count Uart Fifo Overflow countVirtual COM Software Operation ConfigurationCOM Mapping Server/Client TCP Mode onlyIP Address Enable Control Connection TCP Server or Client OnlyRemote Port Seconds for reconnection intervalProduct Applications Parity SpecificationsLimitation of Liability Technical Support Warranty Information