StarTech.com NETRS2321P manual DIN Rail Mounting, Load Default Settings / System Reset Button

DIN Rail Mounting

Attach the included DIN Rail brackets (one per side) using the provided screws to the top DIN Rail screw hole (marked in the above diagram), and clip to your DIN Rail

Load Default Settings / System Reset Button

Load Default Settings

Press and hold this button for more than 3 seconds, then release to load the factory default settings.

IP address: 10.1.1.1

Subnet Mask: 255.0.0.0

Login ID / Password: admin

System Reset

Press and hold this button for more than 10 seconds, then release to reboot the device (maintains configuration settings)

LED Indicators

LED Name	Status	Description
Ready	On	Power is on and the device is ready.
	Off	Power is off or the device is not ready.
	On	UTP is link.
Link/Act	Blinking	UTP Tx/Rx is activity.
	Off	UTP is not link.
	Blinking	RS-232 port is transmitting or receiving
		data.
Tx/Rx
		No data is transmitting or receiving in
	Off
		RS-232 port.
Instruction Manual

2