3M 11000 Introduction Manual Maintenance, Consulting the Manual, Publication 3M 2011

1-INTRODUCTION (continued)

1.2 How to Read and Use the Instruction Manual	1.2.2 Manual Maintenance
This instruction manual covers safety aspects,	Keep the manual in a clean and dry place near the
handling and transport, storage, unpacking,	machine. Do not remove, tear, or rewrite parts of the
preparation, installation, operation, setup and	manual for any reason. Use the manual without
adjust- ments, technical and manufacturing	damaging it. If the manual has been lost or damaged,
specifications, maintenance, troubleshooting, repair	ask your after sale service for a new copy.
work and servicing, electric diagrams, warranty infor-
mation, disposal (ELV), a definition of symbols, plus
a parts list of the 3M-MaticTMa80f-ifInfeed Conveyor	1.2.3 Consulting the Manual
3M Industrial Adhesives and Tapes Division 3M
Center, Bldg. 220-5E-06 St. Paul, MN 55144-1000	The manual is composed of:
(USA) / Edition June 2011 / Copyright 3M 2011 / All
rights reserved. The manufacturer reserves the right	- Pages which identify the document and the machine
to change the product at any time without notice.
Publication © 3M 2011 44-0009-2097-3.	- Index of the subjects
	- Instructions and notes on the machine
	- Enclosures, drawings and diagrams
	- Spare parts (last section)
1.2.1 Importance of the Manual	All pages and diagrams are numbered.
The manual is an important part of the machine;	The spare parts lists are identified by the figure
all information contained herein is intended to	identification number. All the notes on safety measures
enable the equipment to be maintained in perfect	or possible dangers are identified by the symbol:
condition and operated safely. Ensure that the
manual is available to all operators of this equipment
and is kept up to date with all subsequent amend-
ments. Should the equipment be sold or disposed
of, please ensure that the manual is passed on.	1.2.4 How to Update the Manual in Case of
Electrical and pneumatic diagrams are included in
the manual. Equipment using PLC controls and/or	Modifications to the Machine
electronic components will include relevant schemat-	Modifications to the machine are subject to
ics or programs in the enclosure and in
addition, the relevant documentation will	manufacturer’s internal procedures. The user
be delivered separately.	receives a complete and up-to-date copy of the
	manual together with the machine. Afterwards
	the user may receive pages or parts of the
	manual which contain amendments or
	improvements made after its first publication.
	The user must use them to update this manual.

a80f-if-NA 2 2011 June