3M 11000 SHIPMENT-HANDLING-STORAGE, Transport, Handling and Transportation of Uncrated Machine

Page 23

5-SHIPMENT-HANDLING-STORAGE, TRANSPORT

5.1 Shipment and Handling of Packed Machine


					W
- The machine is ﬁxed on the pallet with four (4)			L		W
			L

bolts and can be lifted by using a fork truck.
- The package is suitable to travel by land and by air.
- Optional sea freight package is available.
- Optional sea freight package is available.	H
	H
Packaging Overall Dimensions
(Figure 5-1)

(See Speciﬁcations).

5.2Handling and Transportation of Uncrated Machine

The uncrated machine should not be moved except for short distances and indoors ONLY. Without the supporting pallet, the machine is exposed to damage and may cause injuries. To move the machine, use belts or ropes, paying attention to place them in the points indicated using care to not interfere with the motor.

Figure 5-1

Figure 5-2

5.3 Storage of the Packed or Unpacked Machine

If the machine is not used for a long period, please take the following precautions:

-Store the machine in a dry and clean place.

-If the machine is unpacked it is necessary to protect it from dust.

-Do not stack anything over the machine.

-It is possible to stack a maximum of two (2) machines (if they are in their original packing).

Figure 5-3

a80f-if-NA

15

2011 June

Image 23

Contents 3M 2011 44-0009-2097-3 B060311-NA 3M Industrial Adhesives and TapesPage Industrial Adhesives and Tapes Replacement Parts and Service Information To Our CustomersThis page is Blank General Information Table of Contents A80f-if Infeed ConveyorSafety IntroductionThis page is Blank Additional Instructions Table of Contents UnpackingInstallation and Operation MaintenancePLC Abbreviations and Acronyms List of ABBREVIATIONS, Acronyms3M-MaticTMa80f-if Infeed Conveyor, Type IntroductionManufacturing Speciﬁcations / Description / Intended Use Publication 3M 2011 Introduction Manual MaintenanceHow to Update the Manual in Case Consulting the ManualData Identifying Manufacturer and Machine General InformationContents a80f-if Infeed Conveyor Stop SafetyGeneral Safety Information Machine while the machine is running To reduce the risk associated with pinch hazards To reduce the risk associated with muscle strainResidual Hazards Personal Safety MeasuresOperators Qualiﬁcations Number of OperatorsEmergency Stop Skill 1 Machine OperatorA80f-if Infeed Conveyor Components Component Locations78-8068-3859-1 Leg Label 78-8060-8481-6 3M Logo not shown 78-8070-1339-2 Label ServiceThis page is Blank Specifications Min Machine Dimensions Minimum Specifications Max MinStorage of the Packed or Unpacked Machine SHIPMENT-HANDLING-STORAGE, TransportHandling and Transportation of Uncrated Machine Unpacking Installation and Operation See -Speciﬁcations Preliminary Electric InspectionPneumatic Connection Front and Rear FlapsImpact hazards Installation and Operation Pneumatic ConnectionProduction Line Placement of Infeed Conveyor Muscle strainGate Pneumatic Components Function Installation and Operation Box Release TimerTimer StopSide Guide Setup Side Guides Tools and Spare Parts Supplied with the Machine Maintenance and RepairsSafety Measures See section Lubrication Products Lubrication Qualiﬁcation / SkillA80f-if-NA June Case of Fire Additional Instructions Enclosures / Special InformationA80F-IF Technical Diagrams Electric Diagram Label Kit Tool KitPart Number Option/Accessory Options and AccessoriesThis page is Blank FigureFig.1541415414 FigureFig.1541615416A80f-if-NA June A80F-IFA80f-if Ref. No 3M Part No Description Ottobre A80f-if Ref. No 3M Part No Description 19 1818 A80f-if Ref. No 3M Part No Description Ottobre A80f-if Ref. No 3M Part No Description 1717 A80f-if Ref. No 3M Part No Description A80F-IF A80f-if Adjustable Case SealerA80f-if Ref. No 3M Part No Description Page A80f-if Ref. No 3M Part No Description This page is Blank