To Order Parts:
1.Refer to first illustration, Frame Assemblies, for the Figure Number that identifies a specific portion of the machine.
2.Refer to the appropriate Figure or Figures to determine the parts required and the parts reference number.
3.The Parts List that follows each illustration, includes the Reference Number, Part Number and Part Description for the parts on that illustration.
Note – The complete description has been included for standard fasteners and some commercially availa- ble components. This has been done to allow obtaining these standard parts locally, if desired.
4.Order parts by Part Number, Part Description and Quantity required. Also include the model/machine name, machine type, and serial number that are located on the identification plate.
5.Refer to the first page of this instruction manual “Replacement Parts and Service Information” for replacement parts ordering information.
Important – Not all the parts listed are normally stocked items. Some parts or assemblies shown are available only on special order. Contact 3M/Tape Dispenser Parts to confirm item availability.
Options and Accessories
For additional information on the options and accessories listed below, contact your 3M Representative.
Part Number | Option/Accessory |
N/A | N/A |
| 29 | 2011 June |