Menus, Setup System | NorthStar Navigation NS3300 instruction

6 Menus

Many of the NS3300 Pilot features and functions are operated through menus.

•To scroll through menu items, scroll through items in a list or change data use the Control Dial. Clockwise scrolls across/down or increments data.

•To select a menu item press .

•To go back to the previous menu press .

•To accept changes press .

•To discard changes press .

Occasionally items in the NS3300 Pilotmenus utilize checkboxes.

•If the box is ‘checked’ (contains a check or tick), then that function is selected (enabled) or ON.

•If the box is ‘un-checked’ (does not contain a check or tick), then that function de-selected (disabled) or OFF.

•To select or de-select a checkbox, highlight the menu

item using the control dial and press . The change will happen immediately.

The main menu for configuring the NS3300 Pilot is the

Setup menu. Press until the Setup menu is displayed (normally twice).

The Setup menu and options are summarized in this chapter. The factory default settings are shown where applicable. Each Setup menu option is explained in the following sections.

6-1 Setup > System

Tip: In case you can’t read the current language, the language setting is the first item in the system menu.

Language

Select the language for the display. The options are: English, Italian, French, German, Spanish, Dutch, Swedish, Portuguese, Finnish and Greek.

Backlight

The backlight pop-up is displayed (see also section 3-4).

The bar setting represents the current level of backlighting.

Night Mode –Allows low contrast Night mode.

Auto – allows night mode to be selected in backlight pop-up

On – night mode is active all the time Off – night mode tis not available

Key beep

Enables or disables an audible beep when a key is pressed or Control Dial is rotated.

Auto power off

Select to have the autopilot power off automatically every time the boat’s ignition is switched off. This applies only if the display unit is wired for Auto Power (see installation manual).

About

Displays information about the unit.

Factory Reset Resets all settings to the factory default settings. A warning box asks: Are you sure? Select Yes

and press to confirm, or No or to cancel.

Main control unit – Resets the MCU’s settings Head unit – Resets just this head unit’s settings

Both – Resets the MCU’s settings and this unit’s settings

26	Northstar NS3300 Pilot

NS3300 specifications

The NorthStar Navigation NS3300 is a powerful marine navigation system designed for both commercial and recreational vessels. It represents the pinnacle of marine technology, enabling sailors and captains to navigate with precision and confidence, regardless of conditions. The NS3300 is particularly renowned for its user-friendly interface, advanced features, and robust design, making it a favored choice among maritime professionals.

One of the standout features of the NS3300 is its integration of the Global Navigation Satellite System (GNSS). This technology provides accurate positioning by connecting to multiple satellites, ensuring seamless navigation even in remote areas where traditional navigation methods may fall short. With the support for GPS, GLONASS, and other satellite systems, users can expect high reliability and accuracy in determining their vessel's location.

The NS3300 is equipped with a high-resolution color display that makes information easily readable, even in direct sunlight. The touchscreen interface is intuitive and responsive, allowing for quick access to essential navigation data. Users can customize their screens according to their preferences, displaying the information that matters most to them, including charts, routes, and environmental data.

Another critical aspect of the NS3300 is its advanced chart plotting capabilities. The system supports various digital chart formats, allowing users to integrate their preferred charts seamlessly. The built-in electronic chart display functionality helps in visualizing navigation routes and identifying potential hazards, ensuring safer passage through busy waterways.

The NS3300 also features connectivity options that enhance its functionality. With support for Wi-Fi, Bluetooth, and NMEA 2000 protocols, users can connect the NS3300 to other onboard systems, such as radar, sonar, and autopilot systems. This interoperability allows for a more integrated approach to navigation, providing a comprehensive overview of the vessel's environment.

Moreover, the NS3300 comes with robust weather information capabilities. It can receive real-time meteorological data, enabling captains to make informed decisions based on changing weather conditions. This feature is invaluable for both safety and route planning.

In conclusion, the NorthStar Navigation NS3300 is a sophisticated marine navigation system that combines state-of-the-art technologies and user-centric design. Its precise positioning capabilities, advanced chart plotting, connectivity features, and real-time weather information make it an essential tool for anyone venturing onto the water. Whether for commercial fishing, leisure sailing, or shipping, the NS3300 stands out as a reliable and efficient navigation solution. By integrating cutting-edge technology with usability, it empowers mariners to navigate with confidence and assurance.