NOTE: Turning the unit off erases all user settings and it returns to the system defaults. For example, if you turn the lights on, then turn the unit off, the next time you turn the unit on, the lights will be off, since the default setting for the lights is off.
MENUS
This sonar unit uses menus to guide you through the unit’s functions and features. The menu keys accesses these features, allowing you to customize the unit to your particular needs and water conditions. All you have to do to leave one menu and enter another is press a menu key repeatedly. If you ever get lost in the menus, simply press the PWR/CLEAR key. This clears the menus from the screen.
Menus change depending on the mode the unit is in. For example, if the automatic mode is turned off, the sensitivity menu changes from “AUTO SENS” to “MAN SENS.” Other messages may appear in menu boxes or new menus can appear, again depending on previous selections.
On the screen shown on the previous page, the backlight menu is showing. Pressing the up arrow key while this menu shows turns the back lights on.
OPERATION
AUTOMATIC
When the unit is first turned on, the automatic feature is enabled. This feature automatically adjusts the unit’s range and sensitivity according to water conditions. It always keeps the bottom displayed in the lower portion of the screen.
To turn the automatic feature off, press a menu key until the AUTO/MAN menu appears. Now press the down arrow key. This highlights the letters “MAN.” The unit is now in the manual mode.
Wait a few seconds and the menu will scroll off the screen’s left side. Pressing the PWR/ CLEAR key also erases it. To turn the auto- matic feature on again, repeat the above steps, except this time press the up arrow key.
15