Introduction, Specifications | Eagle Electronics ID 128 specs

INTRODUCTION

Thank you for purchasing an Eagle sonar. Your Fish ID 128 is a high quality sonar designed for both professional and novice fishermen. This unit has an automatic feature that finds and displays the bottom, fish, structure, and more! All you have to do is press the on key. However, if you wish to fine tune the unit, simply press a menu key. This unit has powerful features available through easy-to-use menus.

To get started with your Eagle sonar, first read the installation section. This is where it all begins. Improper installation can cause problems down the road. After you’ve read the instructions, install the unit, then read the rest of the manual. The more you know about your unit, the better it will perform for you. Take this manual for reference when you head for the water.

SPECIFICATIONS
Dimensions	5.9" W x 5.35" H x 3.4" D
Input Voltage	10 - 15 vDC
Current Drain	150 ma (lights off)
	250 ma (lights on)
Transmitter
Frequency	192 kHz
Output Power	275 watts (peak-to-peak)
	37.5 watts (RMS)
Display	128 pixels (H) x 64 pixels (W)
	Supertwist Liquid Crystal Display

5.9"

3.4"

5.35"

NOTICE!

The storage temperature for your unit is from -4 degrees to +167 degrees Fahrenheit (-20 degrees to +75 degrees Celcius). Extended storage in tempera- tures higher or lower than specified will damage the liquid crystal display in your unit. This type of damage is not covered by the warranty. For more information, contact the factory customer service department or your local service center.

INTRODUCTION

SPECIFICATIONS