Step 2: TANK SETUP
Use the navigation pad to highlight TANK SETUP, then press 
.
Tank Setup will allow you to 1) Name each tank 2) Set each tank’s capacity and 3) Set a low level warning for each tank.
Note: Refer to your boat owner’s manual for the correct tank capacities. Setting the tank capacity incorrectly will effect the performance of the Fuel Flow Manager.
Use the left or right navigation buttons to select either Tank 1, Tank 2, or Tank 3.
Once the desired tank is selected, press 
. Now scroll up or down to select the setting to change and use the left or right arrows to make the appropriate changes.
Note By selecting 
on the “Fuel Tank?” option, you are indicating that the tank connected to the associated sender is a fuel tank. Any tank that is indicated as a fuel tank will be used by the Fuel Flow Manager for calculation. If the associated tank is
not a fuel tank, then select 
. Improper tank indication will effect the performance of the Fuel Flow Manager.
Once you have adjusted all the options to the desired settings, press 
. The 
icon on the Save Changes bar will automatically highlight. If your changes are
correct, press 
to save. 
will appear to confirm that the changes have been saved. If the changes are not correct, use the navigation pad to highlight 
and
press 
. 
will appear to confirm that the changes have not been saved.
Once you have saved all the appropriate settings, press 
to return to the SYSTEM SETUP menu.
8