Fuel Manager

STOP: Your fuel tanks must be activated and set to the proper capacity before the fuel

manager will become functional. Refer to Part II: SYSTEM SETUP for further information.

It is CRITICAL that you correctly set the TOTAL AMOUNT OF FUEL each time you refuel.

Total Amount of Fuel = Fuel Added + Fuel Remaining

Use the up or down navigation buttons to highlight the desired setting, then use the left or right navigation buttons to change the value of the highlighted area. You can make changes to all of the Fuel Manager options before saving.

Once all the changes have been properly set, press . The icon on the Save

Changes bar will automatically highlight. If your changes are correct, press to

save. will appear to confirm that changes have been saved. If the

changes are not correct, use the navigation pad to highlight and press . will appear to confirm that the changes have not been saved.

Note: The TOTAL AMOUNT OF FUEL must be set to the proper value to insure accurate performance from the Fuel Manager.