Step 3: Depth Setup
Use the navigation pad to highlight DEPTH SETUP, then press 
.
Depth Setup will allow you to set the shallow water alarm, set the deep water alarm, and set the keel offset.
Note: A digital depth transducer must be installed on your boat for the depth option to work. Refer to your owner’s manual to determine if there is a transducer installed. Your Antares will automatically recognize if a compatible digital depth sounder is installed.
Use the up or down arrows on the navigation pad to highlight the desired option, then use the left or right arrows on the navigation pad to make the appropriate changes.
Once you have adjusted all the options to the desired settings, press 
. The 
icon on the Save Changes bar will automatically highlight. If your changes are
correct, press 
to save. 
will appear to confirm that the changes have been saved. If the changes are not correct, use the navigation pad to highlight 
and
press 
. 
will appear to confirm that the changes have not been saved.
Once you have saved all the appropriate settings, press 
to return to the SYSTEM SETUP menu.
YOU ARE NOW FINISHED WITH THE SETUP PROCESS. PRESS 
TO RETURN TO THE MAIN MENU SCREEN. SIMPLY USE THE NAVIGATION PAD TO MOVE YOUR WAY THROUGH THE ANTARES DISPLAY SCREENS. YOU ARE NOW READY TO HEAD OUT ON TO THE WATER.
9