Trim Calibration

Press to begin Trim Calibration, then follow the on-screen instructions.

Step 1: Set your engine to its full down position, then press .

Step 2: Set your engine to the top of its trim range (prop still in water),

then press .

Step 3: Set your engine to the top of its trailer / full-up position, then press

Once step 3 is completed, the screen will display “TRIM CALIBRATION

COMPLETE” and the icon on the Save Changes bar will automatically highlight. If ALL steps were followed correctly, press

to save. will appear to confirm that the changes have been saved. If ALL steps were not followed correctly, use the

navigation pad to highlight and press . will appear to confirm that the changes have not been saved.

The Antares will automatically return to the previous screen.