| 5 x 20 |
|
5 x 20 | 5 x 20 | 5 x 20 |
|
|
M5 x 14
No.1 | M5 x 14 | No. 2 |
|
|
5
Tape | Transom mount transducer, |
| |
Transom mount transducer, | mounted projecting from hull |
| |
mounting flush with hull | Transducer preparation |
|
Installing the transom mount transducer on a deep-V hull
This method is employed on
Install the transducer parallel with water surface; not flush with hull. If the boat is placed on a trailer care must be taken not to damage the transducer when the boat is hauled out of the water and put on the trailer.
Before putting the boat in water, wipe the face of the transducer thoroughly with a detergent liquid soap. This will lessen the time necessary for the transducer to have good contact with the water. Otherwise the time required for complete “saturation” ill be lengthened and performance will be reduced.
DO NOT paint the transducer. Performance will be affected.
28