Interphase Tech U1-BBFF-DFN user manual Info on Fish Finder System Information, System Update menu

Page 16

below the bottom of the screen, automatically moves up/down the current zoomed Fish Finder Display view and re-position the Variable Depth Marker (VDM) at the center of the screen.

NOTE Pressing [CLEAR] hides the Depth Cursor and if the Fish Finder is in Auto Range or Bottom Lock mode switches into Bottom Lock Zoom mode.

2.4INFO ON FISH FINDER: SYSTEM INFORMATION

If you want to know information about the Fish Finder connected, follow the procedure:

[MENU] + "SETUP" + [ENTER] + "SYSTEM INFORMATION" + [ENTER]

A window will be shown with the desired information on the Fish Finder Library row and on the Fish Finder module row.

Fig. 2.4 - System Information page

2.4.1 The System Update menu

The System Update menu allows downloading the Fish Finder firmware into the Fish Finder device. To select this menu follow the procedure:

[MENU] + "SETUP" + [ENTER] + "SYSTEM INFORMATION" + [ENTER] +

[MENU] + "Update BBFF Firmware" + [ENTER]

The current Fish Finder firmware version is shown in the System Update window that appears on the screen.

Insert the C-CARD with the firmware in one of the chart plotter available slots, and the press [ENTER] to update. Now select "YES" and press [ENTER] to confirm.

WARNING

Turn Off and after a few seconds turn On the 50-200 FISH FINDER in case of failed firmware upload.

18	User Manual

Image 16

Contents Fish Finder Contents Fish Finder Important Information Warrranty StatementIntroduction Conventions UsedFrequently Asked Questions If YOU Need AssistanceOverview Fish FinderOverview Features & FunctionsFish Finder Selecting the Fish Finder Port Fish Finder Understanding the Fish FinderFish Finder Display Color BarUnderstanding the Fish Finder Display How to select the Fish Finder Displaying the Fish FinderFish Finder Full Display Menu keyCursor key Enter key3 50/200 kHz Full Display Zoom Full DisplayClear key Zoom in and Zoom OUT keysChart/Fish Display Menu key to change the active windowBottom Lock Zoom Zoom ModesMarker Zoom System Update menu Info on Fish Finder System InformationSetup your Fish Finder Fish Finder Setup MenuDepth ShiftFrequency Interference RejectionDisplay Setup Fish SymbolsSTC Length STC StrengthWater Temperature Transducer SetupCalibrate Water Temperature Calibrate Aux TemperatureTemperature Upper Temperature LowerTemperature Rate Fish AlarmPage Technical Specifications TEMP2Installation DimensionsMounting the Fish Finder Installing Optional Devices Status LEDPower Supply Wiring Diagram External ConnectionsChart Plotter Connection Diagram BLUPage Transducers Page Frequently Asked Questions 1a The 50-200 Fish FinderHow can I set optimal operating parameters What are preset modes?What are extreme situations in which auto modes may Fail? Should I do? What should I do if the auto modes fail?Eliminate it? How can I reduce the surface clutter? Why do I never see fish in the range between 0 to Meters?Screen clutter? Alarm 10, 12, 22 Index