Interphase Tech U1-BBFF-DFN user manual Water Temperature, Transducer Setup, Keel Offset, Alarms

Page 20

Icon

:

shows Fish icons

Icon + Depth

:

shows Fish icons and their depth (accordingly to currently selected depth unit)

The Fish icons displayed are among four different shapes depending on the size of the Target (Small, Med, Big, Huge).

3.1.10.5Water Temperature

Allows you to choose the Water Temperature label displayed over the Fish Finder Display between Primary and External.

[MENU] + "WATER TEMPERATURE" + [ENTER]

3.1.11 Transducer Setup

The Transducer Setup menu contains settings that does not require frequent changes.

[MENU] + "TRANSDUCER SETUP" + [ENTER]

Fig. 3.1.11 - Fish Finder Transducer menu

3.1.11.1Keel Offset

It is the transducer depth offset from the surface. This makes it possible to mea- sure depth from the surface instead of from the trasducer's location.

3.1.11.2Calibrate Sound Speed

Allows calibrating the value of Sound Speed in the water, depending on the water temperature and salinity.

3.1.11.3Calibrate Water Speed

Allows calibrating the value of Water Speed sensor. The calibration value, in the range between -10% to +10%, will be applied to the water speed from the trans- ducer.

3.1.11.4Calibrate Water Temperature

Allows the calibration on the Water Temperature sensor. Using the readings from a precise temperature measuring device, insert here a positive/negative offset to display right value on Fish Finder screens.

3.1.11.5Calibrate Aux Temperature

Allows the calibration of the Aux Temperature sensor. Using the readings from a precise temperature measuring device, insert here a positive/negative offset to display right value on FF screens.

3.1.12 Alarms

The Alarms menu allows you to define additional sonar alarm settings for Fish Alarm, Shallow Alarm, Depth Alarm and Temperature Upper/Lower/Rate.

[MENU] + "ALARM" + [ENTER]

22

User Manual

Page 19 Page 21
Image 20
Page 19 Page 21
Contents Fish Finder Contents Fish Finder Important Information Warrranty StatementIntroduction Conventions UsedFrequently Asked Questions If YOU Need AssistanceOverview Fish FinderFish Finder Features & FunctionsOverview Selecting the Fish Finder Port Fish Finder Understanding the Fish FinderFish Finder Display Color BarUnderstanding the Fish Finder Display How to select the Fish Finder Displaying the Fish FinderFish Finder Full Display Menu keyCursor key Enter key3 50/200 kHz Full Display Zoom Full DisplayClear key Zoom in and Zoom OUT keysChart/Fish Display Menu key to change the active windowMarker Zoom Zoom ModesBottom Lock Zoom System Update menu Info on Fish Finder System InformationSetup your Fish Finder Fish Finder Setup MenuDepth ShiftFrequency Interference RejectionDisplay Setup Fish SymbolsSTC Length STC StrengthWater Temperature Transducer SetupCalibrate Water Temperature Calibrate Aux TemperatureTemperature Upper Temperature LowerTemperature Rate Fish AlarmPage Technical Specifications TEMP2Mounting the Fish Finder DimensionsInstallation Installing Optional Devices Status LEDPower Supply Wiring Diagram External ConnectionsChart Plotter Connection Diagram BLUPage Transducers Page Frequently Asked Questions 1a The 50-200 Fish FinderWhat are extreme situations in which auto modes may Fail? What are preset modes?How can I set optimal operating parameters Eliminate it? What should I do if the auto modes fail?Should I do? Screen clutter? Why do I never see fish in the range between 0 to Meters?How can I reduce the surface clutter? Alarm 10, 12, 22 Index
Top Page Image Contents