Interphase Tech U1-BBFF-DFN Shallow Water, Depth Water, Temperature Upper, Temperature Lower

Page 21

Fig. 3.1.12 - Fish Finder Alarms menu

3.1.12.1Shallow Water

Triggers an alarm when depth becomes shallower than the value set.

3.1.12.2Depth Water

Triggers an alarm when depth becomes deeper than the value set.

3.1.12.3Temperature Upper

Triggers an alarm when the transducer reports a temperature (from TEMP 1 sen- sor) above the value set.

3.1.12.4Temperature Lower

Triggers an alarm when the transducer reports a temperature (from TEMP 1 sen- sor) below the value set.

3.1.12.5Temperature Rate

Triggers an alarm when the transducer reports a temperature (from TEMP 1 sen- sor) variation rate above the value set.

3.1.12.6Fish Alarm

The options for Fish Alarm set the size of the fish that, if detected by the unit, switches an alarm to sound. These options are: Off, Small, Medium, Big and Huge. The alarm sounds if the set size (or bigger) is detected.

3.1.13 Load Settings from User C-CARD

Load the complete settings from the User C-CARD and changes the active menu settings.

Insert the User C-CARD into the slot, then follow the procedure:

[MENU] + "LOAD SETTINGS FROM USER C-CARD" + [ENTER]

3.1.14 Save Settings to User C-CARD

This is useful to avoid the user having to retune up Radar after a Clear RAM operation or a software update.

Insert the User C-CARD into the slot, then follow the procedure:

[MENU] + "SAVE SETTINGS TO USER C-CARD" + [ENTER]

3.1.15 Restore Current Preset Defaults

This option restores the default values only for the current presets (see Par. 3.1.1, Preset Mode) and does not affect the other presets. Follow the procedure:

[MENU] + "RESTORE CURRENT PRESET DEFAULTS" + [ENTER]

A confirmation window is shown. Select "YES" and press [ENTER] again.

User Manual

23

Image 21
Contents Fish Finder Contents Fish Finder Warrranty Statement Important InformationConventions Used IntroductionIf YOU Need Assistance Frequently Asked QuestionsOverview Fish FinderFeatures & Functions OverviewFish Finder Selecting the Fish Finder Port Understanding the Fish Finder Fish FinderFish Finder Display Color BarUnderstanding the Fish Finder Display Displaying the Fish Finder How to select the Fish FinderMenu key Fish Finder Full DisplayCursor key Enter keyZoom Full Display 3 50/200 kHz Full DisplayClear key Zoom in and Zoom OUT keysMenu key to change the active window Chart/Fish DisplayZoom Modes Bottom Lock ZoomMarker Zoom Info on Fish Finder System Information System Update menuFish Finder Setup Menu Setup your Fish FinderShift DepthFrequency Interference RejectionFish Symbols Display SetupSTC Length STC StrengthTransducer Setup Water TemperatureCalibrate Water Temperature Calibrate Aux TemperatureTemperature Lower Temperature UpperTemperature Rate Fish AlarmPage TEMP2 Technical SpecificationsDimensions InstallationMounting the Fish Finder Status LED Installing Optional DevicesExternal Connections Power Supply Wiring DiagramBLU Chart Plotter Connection DiagramPage Transducers Page 1a The 50-200 Fish Finder Frequently Asked QuestionsWhat are preset modes? How can I set optimal operating parametersWhat are extreme situations in which auto modes may Fail? What should I do if the auto modes fail? Should I do?Eliminate it? Why do I never see fish in the range between 0 to Meters? How can I reduce the surface clutter?Screen clutter? Index Alarm 10, 12, 22