4. 50-200 FISH FINDER
This chapter provides instructions to assist in planning the installation of the
4.1TECHNICAL SPECIFICATIONS
♦ | Display Colors | : 16 colors on color chart plotter or 16 gray |
|
| levels on gray levels chart plotter |
♦ | Display Vertical Resolution | : up to 400 pixels (depending on chart |
|
| plotter screen resolution) |
♦ | Power Requirements | : 10 - 35 Volt dc |
♦Over Voltage protection
♦Reverse Polarity protection
♦Power Consumption - operating:17W max
♦Power Consumption - stand by : 1.7W max
♦ | Operating Frequency | : Dual 50 and 200kHz |
♦ | Output Power | : 500/1000W (4000/8000Wpp) |
♦ | Depth Range* |
|
| 1KW/200kHz | : 2.5Ft (0.76m) to 1200Ft (366m) |
|
| Max Typical = 980Ft (299m) |
| 1KW/50kHz | : 5Ft (1.52m) to 4000Ft (1219m) |
|
| Max Typical = 2700Ft (823m) |
| 500W/200kHz | : 2.5Ft (0.76m) to 700Ft (213m) |
|
| Max Typical = 600 Ft (183m) |
| 500W/50kHz | : 5Ft (1.52m) to 1500Ft (457m) |
|
| Max Typical = 1350 Ft (411m) |
NOTE* This is not a guaranteed specification. The actual maximum depth capability of the system depends on the type of transducer fitted, the reflectivity of the bottom, water condition, etc.
♦Status LED
♦ | External Buzzer | : 12VDC, 400mA |
♦ | Speed Sensor | : if available on transducer |
♦ | Temperature Sensor | : one channel TEMP1 (if available on |
|
| transducer), optional second channel |
|
| TEMP2 |
♦ | NMEA Output sentences | : Depth: $SDDPT, $SDDBT |
|
| Speed: $VWVHW |
|
| Trip Log: $VWVLW |
|
| Water Temperature: $YXMTW |
|
| TEMP2 Temperature: $YXXDR |
♦Operating temperature range : 0C to +50C
♦ | Storage temperature range | : |
♦ | Weight | : 1 kg (2,20 LBS) |
♦ | Water Proof Specification | : IP 54 |
♦ | Case Size | : 7.62" (193.30mm) x 6.87" |
|
| (174.30mm) x 2.19" (55.50mm) |
User Manual | 25 |