GE UPGT650, DPGT650 Standard Rear Exhaust, Dryer Exhaust to Side or Bottom of Cabinet

Installation Instructions

EXHAUSTING THE DRYER (cont.)

BEFORE YOU BEGIN

•Remove and discard existing plastic or metal foil duct and replace with UL-listed duct .

•Remove any lint from the wall exhaust opening.

	Wall
Internal
Duct
Opening	Check that exhaust
	hood damper
	opens and closes
	freely.

STANDARD REAR EXHAUST

We recommend that you install your dryer before installing your washer. This will permit direct access for easier exhaust connection.

Slide the end of the exhaust duct underneath the clips on the back of the dryer and secure with duct tape or a hose clamp.

Clip

Duct

NOTE: We strongly recommend using rigid metal exhaust duct .

•For straight-line installation, connect the dryer exhaust to the wall using duct tape.

RECOMMENDED CONFIGURATION TO MINIMIZE EXHAUST BLOCKAGE

Using duct elbows will prevent duct kinking and collapsing.

Transition

Ducting

DRYER EXHAUST TO SIDE OR BOTTOM OF CABINET

If you wish to exhaust your dryer to the side or bottom of the cabinet, order exhaust kit 14-A003, available from your GE supplier.

Wall Side

Dryer

Side

28