Power, Cycles, Time Dry, Dry Level | GE DPGT650, UPGT650 specification

GEAppliances.com

1 Power

Press to “wake up” the display. If the display is active, press to put the dryer in the idle mode.

NOTE: Pressing POWER does not disconnect the appliance from the power supply.

2 Cycles

The cycle controls the length and tumble speed of the drying process. The chart below will help you match the dry setting with the loads.

Sensor Cycles

COTTONS For cottons and most linens.

MIXED LOAD For loads consisting of cottons and poly-blends.

WRINKLE FREE For wrinkle-free and permanent press items.

ACTIVE WEAR Clothing worn for active sports exercise and some casual wear. Fabrics include new technology finishes and stretch fibers such as Spandex.

DELICATES For lingerie and special-care fabrics.

ULTRA DELICATES For delicate fabrics.

Manual Dry Cycles

SPEED DRY For small loads that are needed in a hurry, such as sports or school uniforms. Can also be used if the previous cycle left some items damp, such as collars or waistbands.

DEWRINKLE For removing wrinkles from items that are dry or slightly damp. This cycle is not recommended for delicate fabrics.

AIR DRY Use this feature to tumble items without heat.

My Cycles (on some models)

MY CYCLES Press to use, create or modify custom dry cycles.

3 Time Dry

Use to set your own dry time. TIME DRY is also recommended for small loads.

To use TIME DRY:

1.Press the TIME DRY button until the amount of time you want is selected.

2.Select the temperature by pressing the TEMP button.

3.Close the door.

4.Press the START/PAUSE button.

4 Dry Level

The sensor continuously monitors the amount of moisture in the load. When the moisture in your clothes reaches your selected dry level, the dryer will stop.

VERY DRY Use for heavy fabrics.

MORE DRY Use for heavy or mixed type of fabrics.

NORMAL Use for normal dryness level suitable for most loads. This is the preferred cycle for energy saving.

LESS DRY Use for lighter fabric (ideal for ironing).

DAMP DRY For leaving items partially damp.

Safety Instructions Operating Instructions

Instructions

Installation

Troubleshooting Tips Consumer Support

DPGT650, UPGT650 specifications

The GE UPGT650 and DPGT650 are advanced gas turbine models developed by General Electric, known for their cutting-edge technology and high efficiency. Designed primarily for power generation and industrial applications, these gas turbines represent the latest in innovation and performance in the energy sector.

At the heart of the UPGT650 is its high-efficiency design that optimizes fuel consumption while reducing emissions. This gas turbine operates at a high pressure ratio, which significantly enhances its overall efficiency, making it a preferred choice for operators seeking to minimize operational costs while maximizing output. The UPGT650 boasts a fuel flexibility feature, enabling it to run on various fuels, including natural gas and liquid fuels, catering to different operational needs and geographical conditions.

The DPGT650 variant, specifically developed for applications requiring high reliability and performance in distributed power generation, offers similar efficiency benefits while providing enhanced operational flexibility. Its modular design allows for easy maintenance and upgrades, which is crucial for facilities needing to adapt to changing energy demands and regulatory environments.

Both turbine models incorporate advanced technologies such as advanced cooling systems to maintain optimal operating temperatures and enhance durability. The utilization of advanced materials in the turbine blades contributes to their ability to withstand high thermal and mechanical stress, further improving performance longevity. Additionally, the turbines are equipped with sophisticated control systems that enable operators to achieve precise load management and efficient power dispatch.

A critical characteristic of the UPGT650 and DPGT650 is their environmental performance. These turbines are engineered to meet stringent emissions standards, effectively reducing CO2 and NOx emissions. This makes them suitable for regions with strict environmental regulations, appealing to companies focused on sustainability and environmental responsibility.

In summary, the GE UPGT650 and DPGT650 gas turbines stand out in the energy landscape for their efficiency, reliability, and environmental performance. With features like fuel flexibility, advanced cooling technologies, and modular design, they are poised to meet the evolving demands of the power generation industry, driving the transition towards cleaner and more efficient energy systems.