1.MOUNTING
5.Position the signal cable so that no more than 4 cm of the sheath is exposed as shown in the figure below. Tighten fixing bolts.
| Tubing |
| Shield |
| Sheath |
Within 4 cm | Bolt |
|
Plate |
Gasket |
Flat |
washer |
CABLE GLAND
Figure 1-12 How to fix signal cable in cable gland
6. Unfasten four screws shown in the figure below.
Four screws
Figure 1-13 Antenna unit chassis, cover opened
7. Pass the signal cable through the cable protector.
Cable protector
Figure 1-14 Antenna unit chassis, cover opened
8.Connect the signal cable to the RTB Board (03P9249), referring to the interconnection diagram and the figure below.