1. MOUNTING
1.7 Mounting the Display Unit
The display unit is designed to be mounted on a tabletop.
1.Using the hanger as a template, mark screw locations in the mounting location.
2.Fix the hanger to the mounting location with four 5 x 20 tapping screws (supplied).
3.Fit the knob bolts to the display unit.
4.Install the display unit in the hanger.
5.Tighten the knob bolts securely.
222(8.7")
236(9.3")
Cutout dimensions for flushmount
**
4 - ∅ 6
FIXING HOLES
268
(10.55")
*80 (3.15") 15
(0.59")
238
(9.37")
* : SERVICING CLEARANCE
**: If the mounting location is subject to heavy vibration, fasten the display unit in the hanger perpendicularly so that it contacts the rubber cushions.
**
130
(5.12")
*140
(5.51")
10
100(0.39")
(3.94")
15
20 (0.59") *80 (0.79")
(3.15")