Menu Operation

Picture Control

1.Press the MENU button to call up the menu.

2.Move the selection bar to the Picture menu with the ▼PR▲ buttons.

3.Press the VOL► button.

4.Select the item to adjust with the ▼PR▲ buttons.

5.Press the ◄VOL► buttons.

The level adjust mode of each function appears : “Brightness”,“Contrast”,“Colour”,“Sharpness”,“Tint”. You can adjust the level of each item by using the ◄VOL► buttons.

NOTE:

Tint is displayed only when receiving a NTSC signal. The adjusted levels are stored automatically in Favourite mode.

NOTE:

You cannot adjust the colour saturation in PC and DVI mode.

This is PRE-SET to the correct level by the system.

Smart Picture mode Selection

1.Select Mode from the Picture menu.

2.Using◄VOL► buttons, Select the desired mode.

Four pictures settings;

Standard > Dynamic > Cinema > Favourite

Note :

When you press the Picture button on the remote controller repeatedly, you can call up four pictures settings.

Standard: For a highly defined image in a normally bright room

Dynamic: For a clear-cut image emphasizing high contrast for sports viewing

Cinema: Ideal for movies

Favourite: Allows the user to customize settings as desired.

 

Picture

Mode

Standard

 

Sound

Brightness

48

 

 

 

 

Screen

Contrast

63

 

Colour

50

 

 

CH

Install

Sharpness

50

 

 

 

Features

Tint

0

 

Move

Select

Menu:Save

23

Page 23
Image 23
Daewoo DLP-3212, DLP-2612 instruction manual Menu Operation, Picture Control, Smart Picture mode Selection