Preparation

Aerial Connection with VCR

Connect your aerial cable to the RF(aerial) IN terminal on the VCR.

Connect the RF OUT terminal of the VCR to the Aerial terminal on the TV set with RF cable.

NOTE: If you wish to use only the Aerial (RF) connection to match the VCR, then you should store the VCR channel on the TV to programme number “ZERO” using the “Manual tuning” function (See page 20). Now you can watch the VCR in TV mode by selecting the pro- gramme number “PR00”.

VCR

RF IN

RF OUT

11

Page 11
Image 11
Daewoo DLP-3212, DLP-2612 instruction manual Aerial Connection with VCR, Vcr