Furuno 851 MARK-2 installation manual Input/Output Data List

Page 20

2. WIRING

2.2 Input/Output Data List

This radar can receive the following NMEA 0183 format data sentences from a navigator or echosounder. Your vessel’s position in latitude and longitude, the range and bearing to waypoint, speed, course, and depth may be seen on the display.

Input

GLL:

Geographic position – Lat/Long

BWR:

Bearing and Distance to Waypoint – Rhumb line

BWC:

Bearing and Distance to Waypoint – Great circle

GLC:

Geographic position – Loran-C

GTD:

Geographic position – Time Difference

RMA:

Recommended Minimum Specific Loran-C Data

RMB:

Recommended Minimum Navigation Information

RMC:

Recommended Minimum Specific GPS/Transit Data

VTG:

Track Made Good and Ground Speed

MTW:

Water Temperature

DBT:

Depth Below Transducer (Ver 1.5)

DBS:

Depth Below Surface

DPT:

Depth (Ver 2.0)

GGA:

GPS – Rx status, L/L

VBW:

Dual ground/water speed

DBK:

Depth

HDM:

Heading Magnet

HDG:

Heading Deviation and Variation

HDT:

Heading True

Output

TLL:

Target Position

RSD:

Radar System Data

2-3

Image 20
Contents Installation Manual Marine Radar Model 851 MARK-2 First Edition Safety Instructions Only qualified personnel System Configuration Equipment Lists Mounting Mounting Methods for Antenna UnitFixing Holes in Mounting Platform Fastening the Radiator to the Radiator BracketMounting the Antenna Unit Outside fixing holesAntenna unit How to fasten antenna unit to mounting platform Fixing holes inside antenna unit Connecting the Signal Cable 10 Antenna unit chassis, cover opened12 How to fix signal cable in cable gland 15 Antenna unit chassis, cover opened Mounting Methods for Display Unit Mounting the Display Unit Servicing ClearanceWiring ConnectionsSignal cable connection Input/Output Data List InputAttaching Option Connector Display unit rear viewConnection of two Nmea equipments Installation Check List TDH TDC ShieldAdjustment Checking magnetron heater voltageInitial Adjustment of Picture STC AutomanDisplaying the Installation Menus Main MenuEntering Initial Settings Installation setup 2 menuHeading Alignment Sweep Timing Inward OutwardPage Page Page Page Page Page