Furuno 851 MARK-2 installation manual Displaying the Installation Menus, Main Menu

3. ADJUSTMENT

3.3 Displaying the Installation Menus

Two sets of installation menus, Installation Setup 1 and Installation Setup 2 enable entry of initial settings and adjustment of the radar.

Procedure

1.Turn on the power while pressing and holding down the [HM OFF] key.

2.Press the [MENU] key.

● MAIN MENU ●

Select item by ▲▼ keys and press ENT key.

1.Backlight/Brilliance

2.P/L, IR, NR & Radar Mode

3.Nav Data

4.Mode & Function

5. Tuning AUTO MANUAL

6.Self Check

7.Installation Setup 1

. . . . . . . . . . . . . . . . .

Press HM-OFF to temporarily hide menu.

<Press MENU key to escape.>

Figure 3-4 main menu

3. Press the omnipad to select Installation Setup 1 and press the [ENT] key.

● INSTALLATION SETUP 1 ●

Select item and option
by ▲▼ keys.
1. Key Beep		OFF ON
2. Hdg Sensor		MAG GYRO
3. Ant on Tx		ROTATE STOP
4.	Demo Display	OFF ON
5.	Rotation Speed	24 48 rpm
6.	Installation Setup 2

. . . . . . . . . . . . . . . . .

Press HM-OFF to temporarily hide menu.

<Press MENU for main menu.>

Figure 3-5 Installation setup menu 1

4.To display the Installation Setup 2 menu, press the omnipad to select Installation Setup 2 and press the [ENT] key.

3-3