Furuno 851 MARK-2 installation manual Wiring, Connections

2.WIRING

2.1 Connections

Connect the signal and power cables, the ground wire and optional equipment as shown in Figure 2-1.

Signal cable

S03-83

Power cable connector Connect power cable here.

CAUTION

For 24 volt power, replace fuse with 5A fuse (supplied), and attach "5A fuse label" to the fuse cover on power cable.

Factory setting is 10A for 12 VDC set.

Signal cable connector Connect signal cable

from antenna here.

CAUTION

Tighten the boot-band securely to ensure watertightness.

See next page.

		OPTION connector *1
		Connect remote
	OPTION	display here.
		HDG connector *2
		Connect heading
	HDG	sensor here.
		NMEA connector *3
		Connect navaid
	NMEA	here.
10.2-31.2VDC
1 3 GND
2		OPTION connector
	OPTION
DJ-1		Connect navaid,
	MARINE RADAR	echo sounder or
	TYPE	external buzzer here.
	SER.NO.
	DATE
	COMPASS SAFE DISTANCE
	STD M STEER M
	EQUPMENT CLASS
	FURUNO ELECTRIC CO., LTD
Ground terminal
Connect ground wire between
here and ship's ground.

Figure 2-1 Display unit, rear view

*1:The following cables are supplied with remote display.

TypeCode no. Remarks FM-C10FPD002-050 000-143-894 5m FM-C10FPD002-100 000-143-893 10m FM-C10FPD002-150 000-143-892 15m

2-1