APC J25B, J35B manual Troubleshooting, Problem Possible Cause Corrective Action

Page 13

Troubleshooting

Problem

Possible Cause

Corrective Action

 

 

 

The unit will not switch on.

The unit is not connected to utility power.

Ensure that the unit is securely connected to

 

 

an AC outlet.

 

 

 

 

The internal battery is not connected.

Connect the battery.

The unit does not provide

Ensure that essential equipment is not

Disconnect equipment from the SURGE

power during a utility power

plugged into a SURGE ONLY outlet.

ONLY outlet and re-connect to a Battery

outage.

 

Backup outlet.

 

 

 

The unit is operating on

The plug has partially pulled out of the

Ensure that the plug is fully inserted into

battery power, while connected

wall outlet, the wall outlet is no longer

the wall outlet. Ensure that the wall outlet is

to utility power.

receiving utility power, or the circuit

receiving utility power by checking it with

 

breaker has been tripped.

another device.

 

 

 

 

The unit is performing an automatic self

No action is necessary.

 

test.

 

The utility input voltage is out of range, the frequency is out of range, or the waveform is distorted.

Adjust the transfer voltage and sensitivity range.

The circuit breaker has been tripped.

Disconnect non-essential equipment from the unit. Reset the circuit breaker. Re- connect equipment one item at a time. If the circuit breaker is tripped again, disconnect the device that caused the trip.

The unit does not provide the expected amount of backup time.

Battery Backup outlets may be fully or

Disconnect non-essential equipment from

improperly loaded.

the Battery Backup outlets and connect the

 

equipment to SURGE ONLY outlets.

 

 

The battery was recently discharged due

Charge the battery cartridge for 16 hours.

to a power outage and has not fully

 

recharged.

 

The battery has reached the end of its

Replace the battery.

useful life.

 

Power is not supplied to some outlets.

Power to the Controlled outlets has intentionally been turned off.

Confirm that the correct peripherals are connected to Controlled outlets. If this feature is not desired, disable the Power- Saving Master and Controlled outlets.

The Controlled outlets are not supplying power, even though the Master device is not in sleep mode.

The Master Outlet threshold may be incorrectly set.

Adjust the threshold when the Master outlet signals the Controlled outlets to shut down.

APC A/V J Type Power Conditioner and Battery Backup

9

Image 13
Contents Installation and Operation Page General Information Page General Information Inventory SafetyOverview Front view ComponentsRear view Connect the Battery InstallationConnect Input Power Power-saving Master and Controlled outlets J35 units only Battery backup and surge outletsConnect the Equipment Display Interface Menus OperationStart up menu screens Status menuSetup menu Audio Alarm OFF Press to Chng Screen saver. Turn the screen saver on or off Problem Possible Cause Corrective Action TroubleshootingReplacement Battery SpecificationsContact APC APV Technical Support Warranty Page Page Descripción general Información generalInventario Seguridad Vista delantera ComponentesVista posterior Conexión de la batería InstalaciónConexión de la alimentación de entrada Conexión de los equipos Menús de la interfaz de pantalla FuncionamientoPantallas de menús de inicio Menú Status estadoMenú de configuración Audio Alarm OFF Press to Chng Salvapantallas. Puede activar o desactivar el salvapantallas Problema Posible causa Acción correctiva Resolución de problemasBatería de recambio EspecificacionesPage Page Présentation Informations généralesInventaire Sécurité Vue de face ComposantsVue arrière Connexion de l’alimentation d’entrée Connexion de la batterieConnexion de l’équipement Menus de l’interface d’affichage FonctionnementEcrans du menu de démarrage Menu Status EtatMenu Setup Configuration Audio Alarm OFF Press to Chng Ecran de veille. Activez ou désactivez l’écran de veille Problème Cause probable Mesure corrective DépannageBatterie de rechange CaractéristiquesAssistance technique d’APC APV Garantie Page Page 990-3712A 04/2010 APC Worldwide Customer Support
Related manuals
Manual 41 pages 16.76 Kb

J25B, J35B specifications

The APC J35B and J25B are advanced amphibious personnel carriers developed to meet modern military requirements for versatility, mobility, and survivability. These vehicles are designed to seamlessly operate in diverse environments, including rugged terrains, waterways, and urban landscapes, making them invaluable assets for armed forces around the globe.

The APC J35B is characterized by its robust design and high payload capacity, allowing it to transport a significant number of personnel along with their equipment. It boasts a powerful engine that provides impressive off-road capability and high-speed performance on paved surfaces. The vehicle's advanced suspension system ensures stability and comfort even in the most challenging conditions, reducing fatigue for the crew and troops on board.

On the other hand, the J25B is a slightly smaller variant that emphasizes maneuverability without compromising on protection and functionality. It is well-suited for reconnaissance and special operations missions, equipped with advanced communication systems for real-time battlefield connectivity. The J25B's compact design allows it to navigate confined spaces effectively, making it ideal for urban combat scenarios.

Both models are outfitted with state-of-the-art armor technology, providing superior ballistic protection against small arms fire and shrapnel. Additionally, the vehicles can be equipped with various weapon systems, enhancing their role as multi-functional platforms. This adaptability allows for the integration of machine guns, grenade launchers, or other armaments, depending on mission requirements.

Another outstanding feature of the J35B and J25B is their amphibious capability. These vehicles can transition from land to water effortlessly, enabling military operations that require crossing rivers or operating along coastlines. Their watertight hulls and specialized propulsion systems ensure efficient movement in aquatic environments, further expanding their operational reach.

In terms of technology, both APCs are equipped with modern navigation and control systems. This includes GPS-assisted navigation, night vision capabilities, and defensive measures such as smoke grenade launchers to enhance survivability in combat situations. The integration of advanced communication tools ensures that personnel can coordinate effectively during missions, improving overall mission success.

In summary, the APC J35B and J25B represent the future of military personnel carriers, combining enhanced mobility, versatility, and advanced technology. Their robust construction, amphibious capabilities, and adaptability make them essential assets for modern armed forces, capable of tackling a wide range of missions in diverse environments.