Operating in Invert Mode
Operating in Invert Mode
In invert mode, the XS400 powers your appliances from the battery. If the On/Standby switch on both the XS400 and the S400 Remote Switch are turned to On ( 
), the XS400 automatically supplies your appliances with inverter power if the shore power source fails or becomes disconnected.
To operate the XS400 in invert mode:
1.Disconnect the XS400 from shore power.
2.Turn the On/Standby switch on the XS400 to the On (
) position. The Inverter ON light illuminates on the XS400.
AND
If you have installed the S400 Remote Switch, turn the S400 Remote Switch to On (
).
The Inverter ON light illuminates on the S400 Remote Switch.
3.Operate your appliances.
Important: The XS400 operates normally without the S400 Remote
Switch installed.
If you are not using the XS400, see “Turning the XS400 to Standby When
Not in Use” on page