Xantrex Technology XS400 manual Using the S400 Remote Switch, 2S400 Remote Switch

Operation

Using the S400 Remote Switch

	The S400 Remote Switch performs the same function as the On/Standby
	switch on the XS400.
Invert mode use	The S400 Remote Switch provides On/Standby control only when the
only	XS400 is operating in invert mode.
	To use the S400 Remote Switch, the On/Standby switch on the XS400
	must be turned to the On (	) position. See “Operating in Invert Mode” on
	page 3–5.
	Important: When shore power is present, the S400 Remote Switch
	will not change the operation of the inverter.
Purpose	The S400 Remote Switch provides remote control of the XS400 from a
	convenient location of up to 25 feet (7.5 meters) away using the supplied
	telephone cable.
Cable length	You can use a longer cable up to a maximum recommended length of 50
	feet (15 meters). Xantrex recommends using a high quality 4-wire
	telephone cable with 6-position, 4-contact connectors.

Inverter ON

Figure 3-2S400 Remote Switch

3–4 975-0054-01-01