Xantrex Technology XS400 manual 2Troubleshooting Reference for the S400 Remote Switch

					Troubleshooting Reference
Table 4-1Troubleshooting Reference for the XS400
Problem			Possible Cause		Solution
Fan runs all the time.			The amount of power being		No action. The fan will run at lower speeds
			consumed by the appliances		and stop automatically when the internal
			is high.		temperature of the inverter falls.
			The ambient temperature is		No action. The fan will run at lower speeds
			high.		and stop automatically when the ambient
					temperature falls.
					For more information on the “Fan Cooling
					System”, refer to page A–3.
Table 4-2Troubleshooting Reference for the S400 Remote Switch
Problem			Possible Cause		Solution
The S400 Remote Switch is			The On/Standby switch on		Switch the inverter to On (	).
On (		), but its Inverter ON	the inverter is in Standby (	)
light is off.			mode.
			The cable connection is loose		Check the cable.
			or faulty.
The S400 Remote Switch is			The inverter is in fault/		Check the lights on the front panel of the
On (	) and the Inverter ON		protection mode.		inverter. If the Fault light is illuminated, see
light is illuminated, but					Table 4-1, “Troubleshooting Reference for
appliances do not operate.					the XS400” on page 4–3.

975-0054-01-01 4–5