Safety Instructions
SHOCK HAZARD
Xantrex Technology recommends that all wiring be done by a certified technician or electrician to ensure adherence to the applicable electrical safety wiring regulations.
Failure to follow these instructions can result in death or serious injury.
•Before you begin the installation, review the “Important Safety Instructions” on page iv, and read this entire section so you can plan your installation from beginning to end.
•Disconnect all AC and DC power sources to prevent accidental shock. Disable and secure all AC and DC disconnect devices and automatic generator starting devices.
Installation Codes
Governing installation codes vary depending on the specific location and application of the installation. Some examples include the following:
•The U.S. National Electrical Code (NEC),
•The Canadian Electrical Code (CEC),
•The U.S. Code of Federal Regulations (CFRs),
•Canadian Standards Association (CSA) and the RV Industry Association (RVIA) for installations in RVs, and
•The American Boating & Yachting Committee (ABYC) for Marine installations in the U.S.
It is the installer’s responsibility to ensure that all applicable installation requirements are met.
2 | Freedom HF Installation Guide |