Xantrex Technology 806-1840-02, 806-1020 AC Output Connections for the Freedom HF 1800 T Model

Page 33

AC Output Connections for the Freedom HF 1000, Freedom HF 1055, and Freedom HF 1800 models

To make a permanent connection to existing AC wiring:

Basic Installation Procedures

AC Output Connections for the Freedom HF 1800 T Model

FREEDOM

 

 

 

AC

 

 

OUT

L

G

N

10mm

clamp slot

terminal opening

to circuit breaker

 

1800 T

 

only.

 

FREEDOM HF 1800 T

to circuit

 

 

breaker

RESET

 

 

installers

1.

Ensure AC and DC power sources are turned off.

 

qualified

 

 

 

1.Ensure AC and DC power sources are turned off.

2.Install the required circuit breaker in the inverter distribution panel receiving AC power from the inverter.

3.Strip a single strand (e.g. Romex) AC output wire, as appropriate.

4.Locate the Line, Ground and Neutral terminals on the AC OUT terminal labeled as L, G, and N respectively.

5.Using a 3.5mm slot long neck screwdriver, open the WAGO cage clamp by inserting the tool in the clamp slot for Ground terminal.

6.Insert Ground AC wire into Ground terminal slot on the unit.

7.Repeat steps 5 and 6 for Line and Neutral connections.

8.Connect the other end of the wires to a circuit breaker in the inverter distribution panel.

2.

Install the required circuit breaker in the inverter distribution panel

by

 

receiving AC power from the inverter.

 

use

3.

Connect the male PTI cable connector to the AC OUT female PTI

 

receptacle on the unit.

for

4.

Connect the other end of the wires to a circuit breaker in the inverter

This guide

 

distribution panel.

 

 

975-0395-01-01

19

Page 32 Page 34
Image 33
Page 32 Page 34
Contents Freedom HF Inverter/Chargers Page Document Part Number Statement of Hazard About This GuideRelated Information Electrical Shock Hazard Important Safety InstructionsExplosion Hazard Fire and Burn HazardPrecautions When Working With Batteries Exposure to Chemicals and Gases Hazard Precautions When Preparing to ChargeFire Hazard Risk of Damage to the INVERTER/CHARGERRegulatory Precautions for Using Rechargeable AppliancesRisk of Damage to Rechargeable Appliances Limitations on USEKKK Information to the User FCC Information to the UserPage Contents Page What’s In The Box Display panel is attached to the unit Materials ListSafety Instructions Installation CodesShock Hazard Installation Tools and Materials High Level Overview of Installation Steps Basic Installation Procedures To engine Designing the InstallationAC shore power GeneratorAC Disconnect and Over-Current Protection Device AC Distribution Panels AC CablingEquipment Damage AC Output Neutral Bonding AC GroundingDC Cabling Ground Fault Circuit Interrupters GFCIs DC Disconnects and Over-Current DevicesBatteries Choosing a Location for the Unit Close to the battery compartment and the AC source and loadFire and Explosion Hazards Splashing water or bilge waterTo mount the Freedom HF Mounting the UnitGrounding Locations Connecting the Equipment GroundConnecting the AC Input Wires General AC Wiring ConsiderationsFIRE, SHOCK, and Energy Hazards Damage other equipment Installers onlyAC Input Connections for the Freedom HF 1800 T Model Electric Shock Hazard Connecting AC Output to an Existing AC Circuit AC Output Connections for the Freedom HF 1800 T Model To make a permanent connection to existing AC wiringReverse Polarity Damage GNDDC End for Freedom HF 1000, 1055, 1800, and 1800 T Connecting the DC CablesTo make the DC connections For use by qualified installers Anderson Connectors DC GroundingTo connect the DC ground Exposed Ignition Control Terminals To enable ignition controlTo enable ignition control and to connect auxiliary DC power Power Module For Freedom HF 1055 EMS and 1800 EMSUse by qualified installers only To mount the display panel Mounting the Display PanelTesting Your Installation Testing in Invert ModeTo test the Freedom HF in invert mode To test the Freedom HF in shore power mode Testing in Shore Power ModeDifferent Views Drip Shield Installation For Marine InstallationsTo install the drip shields Drip Shield Installation For Marine InstallationsConfiguration Typical Marine Installation Marine InstallationPhysical Specifications SpecificationsDC Input AC Input Page Page Xantrex Technology USA Inc
Related manuals
Manual 64 pages 12.33 Kb

806-1055-02 806-1840, 806-1055, 806-1020, 806-1840-01, 806-1840-02 specifications

Xantrex Technology is renowned for its innovative power solutions, and among its extensive product lineup, the model numbers 806-1840-02, 806-1840-01, 806-1020, 806-1055, and 806-1055-02 stand out for their sophisticated features and reliable performance. These models are primarily designed to meet the diverse energy needs in off-grid, mobile, and backup power applications.

The Xantrex 806 family is characterized by its versatility and high efficiency. One of the standout features across these models is their pure sine wave inverter technology. This technology ensures that the power output closely mimics utility-provided electricity, making it safe to use with sensitive electronics such as computers and medical equipment. The clean, reliable power allows users to operate a variety of appliances without the risk of damaging electrical devices.

Another key characteristic is the ability of these inverters to provide a robust surge capability. This is crucial for starting up heavy equipment or appliances that require a higher initial power draw, such as refrigerators and air conditioners. Users can feel confident knowing that these inverters can handle demanding loads without compromising performance.

Scalability is also a notable feature of the Xantrex 806 models. Users can easily integrate multiple units to expand their power capacity, making them suitable for anything from small RVs to larger off-grid installations. The inverters include advanced communication features, allowing for easy monitoring and management of energy consumption via remote control systems.

Furthermore, these models incorporate user-friendly designs with features aimed at enhancing usability. For instance, the LED indicators provide real-time information about the operational status and battery levels, enabling users to quickly assess their power system’s performance.

Durability and reliability are critical considerations for any power solution, and the Xantrex 806 series meets these demands effectively. Built with high-quality materials, these inverters are designed to withstand the rigors of daily use in various environments, from remote camping sites to urban settings. With built-in safety features such as overload protection, short circuit protection, and thermal shutdown, they provide peace of mind for users.

In summary, the Xantrex Technology models 806-1840-02, 806-1840-01, 806-1020, 806-1055, and 806-1055-02 exemplify advanced engineering in power inverter technology. With their pure sine wave output, impressive surge capability, scalability, and durable construction, they offer reliable solutions for users seeking effective energy management in diverse applications.
Top Page Image Contents