Pioneer S-HTD330 manual Looping a section of a disc, Using repeat play

Playing audio and video discs 06

•The picture quality when using frame reverse is not as good as frame advance.

•Depending on the disc, normal playback may automatically resume when a new chapter is reached.

•When changing direction with a DVD disc, the picture may ‘jump’. This is not a malfunction.

Looping a section of a disc

The A-B Repeat function allows you to specify two points (A and B) within a track (CD and Video CD) or title (DVD-Video and DVD-RW) that form a loop which is played over and over.

3Press ENTER on ‘A(Start Point)’ to set the loop start point.

Play Mode
A-B Repeat	A(Start Point)
Repeat	B(End Point)
Random	Off
Program
Search Mode

4Press ENTER on ‘B(End Point)’ to set the loop end point.

Play Mode
A-B Repeat	A(Start Point)
Repeat	B(End Point)
Random	Off
Program
Search Mode

•You can’t use A-B Repeat with WMA/MP3 discs, Video CDs in PBC mode, unfinalized CD-R/RW discs, or VR format DVD-RW discs.

1During playback, press HOME MENU and select ‘Play Mode’.

2Select ‘A-B Repeat’ from the list of functions on the left.

Play Mode
A-B Repeat	A(Start Point)
Repeat	B(End Point)
Random	Off
Program
Search Mode

After pressing ENTER, playback jumps back to the start point and plays the loop.

• The minimum loop time is 2 seconds.

5To resume normal playback, select ‘Off’ from the menu.

Using repeat play

There are various repeat play options, depending on the kind of disc loaded. It’s also possible to use repeat play together with program play to repeat the tracks/chapters in the program list (see Creating and editing a DVD program list on page 47 and Creating and editing a non-DVD program list on page 49).

•Repeat play is not available with Video CDs in PBC mode, or unfinalized CD-R/ RW discs.

45

En