Pioneer S-HTD330 Using the timer Chapter, Setting the wake-up timer, Set the switch-on time

08Using the timer

Chapter 8

Using the timer

Setting the wake-up timer

Use the wake-up timer to set the system to switch on at any time and start playing whatever source you want.

•The clock must be set to the correct time for the wake-up timer to work properly (see Setting the clock on page 27).

STANDBY/ON

FM/AML1/L2

DVD/CD TUNER TV LINE

VOLUME

ENTER

TIMER

ENTER

SHIFT

1Select the source you want played. For example, press TUNER (TUNER FM/AM/ ST. on the front panel) to select the radio as your source.

2Prepare the source.

For example, tune in the radio station you want to wake up to.

If you’ve selected a CD, make sure that it’s stopped.

3Set the volume.

4Press TIMER (SHIFT + 6) twice to reach the timer menu.

5 Use the (cursor left/right) buttons to select WAKE-UP then press

ENTER.

6 Use the (cursor left/right) buttons to select TIMER EDIT then press

ENTER.

7 Set the switch-on time.

Use the (cursor up/down) buttons to set the hour, then press ENTER. Set the minute in the same way, pressing ENTER when you’re done.

8 Set the switch-off time.

Use the (cursor up/down) buttons to set the hour, then press ENTER. Set the minute in the same way, pressing ENTER when you’re done.

After pressing ENTER this last time, the wake- up indicator lights, and the switch-on, switch- off times, the function (DVD/CD, etc.) and volume are confirmed in the display.

58

En