Pioneer S-HTD330 manual Resume and Last Memory, Using the front panel controls

Getting started 04

Button	What it does
	Press to start fast reverse
	scanning. Press	(play) to
	resume normal playback.
	Press to start fast forward
	scanning. Press	(play) to
	resume normal playback.

Skips to the start of the current track or chapter, then to previous tracks/chapters.

Skips to the next track or chapter.

FOLDER +/– Skips to the next/previous folder when playing an WMA/MP3 disc.

Numbers • If the disc is stopped, playback starts from the selected title (for DVD) or track number (for CD/ Video CD/WMA/MP3) after a few seconds (or after pressing ENTER).

•If the disc is playing, playback jumps to the start of the selected chapter or track after a few seconds (or after pressing ENTER).

•You may find with some DVD discs that some playback controls don’t work in certain parts of the disc. This is not a malfunction.

Using the front panel controls

The OPEN/CLOSE and (stop) buttons on the front panel work the same way as the remote control equivalents.

The front panel scan and skip buttons

( and ) are combined. Press once for chapter/track skip, or press and hold for scanning.

Resume and Last Memory

When you stop playback of a DVD or Video CD disc, Resume is shown in the display indi- cating that you can resume playback again from that point.

If the disc tray is not opened, the next time you start playback the display shows Resume and playback resumes from the resume point.

For DVD discs only: If you change discs using the DISC SKIP, DISC or DIRECT PLAY buttons, or take the disc out of the player, the play position is stored in memory. When you load the disc next time, the display shows Last Mem and you can resume playback (this works for up to five discs).

If you want to clear the resume/last memory point, press (stop) while Resume or Last Mem is displayed.

•When a Video CD is loaded, the Resume point is lost if the system is switched off.

•For the Last Memory function to work, you

must press (stop) to stop playback before opening the disc tray or changing the disc.

•The Last Memory function doesn’t work with VR format DVD-RW discs.

31

En