Pioneer S-HTD330 manual Error Messages

Page 82

12Additional information

Problem

Remedy

Sound is mono only.

• Check that the tuner is not set to FM mono (see Improving poor FM

 

reception on page 35).

 

 

Considerable noise in radio

• Tune into the correct frequency.

broadcasts.

• Connect the antenna (see Connecting the supplied antennas on

 

page 18 and Connecting external antennas on page 77).

 

• Fully extend the FM wire antenna, position for best reception, and

 

secure to a wall.

 

• Connect an outdoor FM antenna (see Connecting external antennas

 

on page 77).

 

• Adjust the direction and position for best reception.

 

• Connect an additional internal or external AM antenna (see AM loop

 

antenna on page 18 and Connecting external antennas on page 77).

 

• Turn off any other equipment that may be causing the noise or move

 

it away from the system unit.

 

• The tuning interval is incorrect for your country or region. Try

 

switching the tuning interval (frequency step) (see Changing the

 

frequency step on page 73).

 

 

Error Messages

Message

Desciption

Child Lock

• This message appears when the front panel buttons are pressed

 

when the child lock feature is active. See Child Lock on page 73 for

 

more on switching on/off the child lock.

 

 

Rec Mode On

• Blinks rapidly for 2 seconds when an operation is prohibited

 

because the Recording Mode is on (see Recording mode on page 78).

 

 

Phones In

• Blinks rapidly for 2 seconds when an operation is prohibited

 

because headphones are connected.

 

 

96K Stereo

• Blinks rapidly for 2 seconds when an operation is prohibited

 

because the source is digital 88.2 or 96kHz PCM.

 

 

No Surr. SP

• Blinks rapidly for 2 seconds when an operation is prohibited

 

because there is no surround speaker output.

 

 

Muting

• Blinks rapidly for 2 seconds when an operation is prohibited

 

because the sound is muted (see Muting the sound on page 41).

 

 

Exit

• Appears briefly when a menu is automatically exited after a set

 

period of inactivity.

 

 

82

En

Image 82
Contents XV-HTD330 Important Safety Instructions For U.S. model Important NoticeEnergy-saving design Information to UserContents Video Adjust menu Using the timerSurround sound setup Initial Settings menuPage Before you start FeaturesBefore you start Chapter Using the remote control Putting the batteries in the remote controlBefore you start What’s in the box General disc compatibility Disc / content format playback compatibilityBefore you start CD-R/RW compatibilityAbout WMA PC-created disc compatibilityCompressed audio compatibility Jpeg file compatibility Connecting up Chapter Connecting upConnecting the speakers Connecting up Placing the speakersWall-mounting the center and surround speaker system Before mountingConnecting up Connecting to your TV Connecting using the S-video outputConnecting using the component video output Listening to TV audio through this systemAssembling the loop antenna Connecting up Connecting the supplied antennasAM loop antenna Connecting the power FM wire antennaControls and displays Chapter Controls and displaysFront panel Controls and displays RPT and RPT-1 Timer indicatorsSpeaker indicators 12 2 PRO Logic IIControls and displays Remote control Tune +/-, ST +/-, cursor control buttons and Enter Playback controlsPress to display/change disc information shown on-screen Press to display the clock and to access the timer menuDisplay Shift + 8 Press to clear an entryGetting started Switching on and setting upGetting started Chapter Setting the clock Using the Room SetupGetting started Using the on-screen displays ButtonPlaying discs Press OPEN/CLOSE to open the disc tray Load a discBasic playback controls Shows Resume or Last MemResume and Last Memory Using the front panel controlsPress to start fast reverse Press Exchange to open the disc tray Getting started Changing discsPress Exchange or OPEN/CLOSE to close the disc tray DVD-Video disc menus NumbersGetting started Video CD PBC menus Listening to the radioImproving poor FM reception Listening to station presetsPress Enter to save the station preset Memorizing stationsSelect the source you want to listen to Getting started Listening to other sourcesIf necessary, start playback of the external source Home theater sound Chapter Auto listening modeHome theater sound Listening in surround soundUse the cursor up/down buttons to adjust the setting Listening with headphonesDolby Pro Logic II Music settings Home theater soundUsing the Advanced Surround effects Adjusting the Advanced Surround effect levelListening with a virtual surround back speaker Using Quiet and Midnight listening modesHome theater sound Enhancing dialogue Press Dialogue to select the amount dialog enhancementBoosting the bass level Home theater sound Adjusting the bass and trebleMuting the sound Playing audio and video discs Playing only CDs, MP3 and WMA discs CD modeUsing the Disc Navigator to browse the contents of a disc Playing audio and video discs ChapterScreen for CDs and Video CDs shows a list of tracks Playing audio and video discsNot all VR format DVD-RW discs have a Playlist F033, T035, etcPlaying in slow motion Scanning discsFrame advance/frame reverse Press Enter on ‘AStart Point’ to set the loop start point Using repeat playLooping a section of a disc Press Enter on ‘BEnd Point’ to set the loop end pointUsing random play Select a repeat play optionCreating and editing a DVD program list Select a random play optionSelect ‘Create/Edit’ from the list of program options Press Home Menu and select ‘Play Mode’Select ‘Program’ from the list of functions on the left Press Enter to add the highlighted item to the program listMake sure that a non-DVD disc is in the play position Other functions available from the program menu Press Home Menu and select Play ModeIf a tray position is empty, ‘- -’ is displayed Select a program play function Create/Edit See above Switching DVD audio languageSearching a disc Press Enter to start playbackSwitching audio channel when playing a Video CD Switching subtitlesZooming the screen Switching camera angles Displaying disc informationFront panel display information Playing a Jpeg slideshow Viewing Jpeg discsViewing Jpeg discs Chapter Press DVD Menu to display the Disc Navigator screenUse the cursor buttons Navigate Using the Photo BrowserViewing Jpeg discs Use the cursor buttons Highlight a thumbnail pictureTo resume the slideshow, press play Setting the wake-up timer Using the timerUsing the timer Chapter Set the switch-on timeTurning the wake-up timer on/off Using the timerSetting the sleep timer Buttons to select Timer on or Timer OFFTo check how much time is left, repeat steps 1 Remaining time is displayed momentarilySetting up surround sound Surround sound setupSurround sound setup Chapter System Setup menu optionsLFE attenuator setting Surround sound setupSetting the channel levels Dual mono settingWhen you’re done, press Enter to exit test tone setup Video Adjust Video Adjust menuVideo Adjust menu Chapter Creating your own presetsVideo Adjust menu Using the Initial Settings menu Initial Settings menuInitial Settings menu Chapter Video Output settingsComponent Out Initial Settings menuDefault setting Interlace About progressive scan videoAudio Language Language settingsVideo Out Subtitle LanguageSubtitle Display Display settingsDVD Menu Language OSD LanguageOptions Angle IndicatorRegistering a new password Parental LockChanging your password Setting/changing the Parental Lock levelSelect ‘Country Code’ Setting/changing the Country CodePhotoViewer Select a country codeAdditional information Using and taking care of discs Resetting the systemAdditional information Storing discs Proper installation and maintenance of this systemHints on installation Discs to avoidPower cable caution Cleaning the pickup lensProblems with condensation Moving the system unitExternal AM antenna Additional information Connecting external antennasConnecting auxiliary components External FM antennaPress Sound Mode Use the Use Reducing the TV and line signal levelsRecording mode Right buttons to select ‘Rec Mode?’ Press Enter UseAdditional information Troubleshooting GeneralDVD/CD/Video CD player STANDBY/ON buttonWMA/MP3/JPEG discs TunerError Messages Widescreen TV users Selecting languages using the language code listAdditional information Screen sizes and disc formats Standard TV usersLanguage Language code letter, Language code Additional information Language code listCountry code list Country, Country code, Country code letterAdditional information Glossary PCM Pulse Code Modulation Mpeg audioMpeg video PBC PlayBack Control Video CD onlyAdditional information Specifications Surround speakers Accessories Speaker systemSubwoofer Page Additional information Additional information Pioneer Corporation