Operation
4. Operation
Control Panel Description
Control Options
Programming
DMX Operation
Stand-alone
Operation
| Button |
| Function |
| <MENU> |
| Exits from the current menu or function |
|
|
| Enables the currently displayed menu or sets the currently selected value |
| <ENTER> |
| |
|
| in to the current function | |
|
|
| |
|
|
| Navigates upwards through the menu list and increases the numeric value |
| <UP> |
| |
|
| when in a function | |
|
|
| |
|
|
| Navigates downwards through the menu list and decreases the numeric |
| <DOWN> |
| |
|
| value when in a function | |
|
|
| |
|
|
|
|
You can set the
Refer to the Menu Map to understand the menu options. The menu map has a Menu Level and a variable number of programming levels for each option.
∙To go to an option in the Menu Level, press <MENU> repeatedly until the option shows on the display. Press <ENTER> to select. This will take you to the first programming level for that option.
∙To select an option or value within the current programming level, press <UP> or <DOWN> until the option shows on the display. Press <ENTER> to select. In this case, if there is another programming level, you will see that first option, or you will see the selected value.
∙To exit to the previous menu level, press <MENU>.
In the EDIT menu, <UP> and <DOWN> will only change the value of the current option. To change to the next option, press <ENTER>.
1.Select a DMX operation.
a)Go to MENU > INTRO > RUN.
b)Select DMX512.
2.Select a DMX mode.
a)Go to MENU > INTRO > CHANNELS.
b)Select BASIC, ADVANCED, or G1.
3.Select the starting address.
a)Go to MENU > INTRO > ADDRESS.
b)Select a starting address, 001~498 (Advanced), 001~498 (G1) or 001~501 (Basic).
The highest possible starting address for each DMX mode is:
DMX Mode | DMX Address |
Basic | 501 |
Advanced | 498 |
G1 | 498 |
1.Go to MENU > INTRO > RUN.
2.Select a
Of all the