Operation
Fan Control This option defines how you can control the fan speed, either from the DMX controller or only from the control panel.
1.Go to MENU > SPECIAL > FAN.
2.Select DMX or SYSTEM.
DMX: Enables the DMX controller to control the fan speed (Control function).
SYSTEM: Restricts the control of the fan speed to the control panel.
Color Calibration If necessary, you may adjust the color temperature of each of the macros (White1~11).
1.Go to MENU > EXTRA.
2.Press <ENTER> (PASSWORD) will show on the display.
3.Press <ENTER> (**** will show on the display).
4.Enter the password, as explained in Keylock (CALIB will show on the display).
5.Press <ENTER> (3200K will show on the display).
6.Use <UP> or <DOWN> to select another color temperature (3400~10000 K), or press <ENTER> to edit the current temperature.
7.Select RED, GREEN, or BLUE.
8.Select a value (000~255).
9.Repeat for the other colors.
White Calibration You may calibrate the white color shown when the RGB faders are at 255 and the MENU > SPECIAL > COLOR setting is RGBTOW.
1.Go to MENU > EXTRA.
2.Press <ENTER> (PASSWORD) will show on the display.
3.Press <ENTER> (**** will show on the display).
4.Enter the password, as explained in Keylock (CALIB will show on the display).
5.Press <ENTER> (3200K will show on the display).
6.Use <UP> or <DOWN> to select RGBW.
7.Select RED, GREEN, or BLUE.
8.Select a value (000~255).
9.Repeat for the other colors.