Chauvet 560Z-LED Go to Menu Special Reset, Go to Menu Special Black, Go to Menu Special Power

Operation

Reset Control

Move-in Black

Power

Color Settings

You are able to select how you reset the product, whether from the DMX controller or only from the control panel.

1.Go to MENU > SPECIAL > RESET.

2.Select DMX or SYSTEM.

DMX: Enables the DMX controller to reset the product (Control function).

SYSTEM: Restricts the reset function to the control panel.

This option enables you to activate or deactivate the move-in black 3-seconds delay.

1.Go to MENU > SPECIAL > BLACK.

2.Select YES to enable the 3 seconds delay or NO to make the blackout immediate.

Use this function to boost the output power for specific, short-term applications.

1.Go to MENU > SPECIAL > POWER.

2.Select NORMAL or HIGH.

The product will return to Normal if the LEDs’ temperature becomes too high.

The COLOR setting determines how the Q-Wash 560Z-LED generates the white color based on various RGB settings.

1.Go to MENU > SPECIAL > COLOR.

2.Select OFF, RGBTOW, or UC.

UC: When the RGB faders are set to “255”, the output matches that of less efficient products (Universal Color).

RGBTOW: When the RGB faders are all set to “255”, the resulting output is defined by RGB-W(see MENU > EXTRA > CALIB).

OFF: When the RGB faders are all set to “255”, the output is maximum, although the resulting white color may not be balanced.

Q-Wash 560Z-LED User Manual Rev. 12 -13-