Intimidator™ Wash LED 150 QRG | EN |
Mounting Before mounting this product, read the Safety Notes.
Bracket Attachment (x2)
Product
Mounting Rubber Feet (x4)
Diagram
Safety Loop Attachment Point
Control Panel
Description
Button | Function |
<MODE/ESC> | Exits from the current menu or function |
<UP> | Navigates upwards through the menu list and increases |
| the numeric value when in a function |
<DOWN> | Navigates downwards through the menu list and |
| decreases the numeric value when in a function |
<ENTER> | Enables the currently displayed menu or sets the |
| currently selected value into the selected function |
DMX Linking
Starting Address
Master/Slave
Connection
The Intimidator™ Wash LED 150 can work with a DMX controller when linked by DMX serial connections. Instructions for connecting and configuring this product for DMX operation are in the User Manual. If you are not familiar with DMX, download the DMX Primer from www.chauvetlighting.com.
To ensure full access to all channels in each DMX mode, the highest recommended DMX address is 497.
The Intimidator™ Wash LED 150 uses the DMX data connection for its Master/Slave mode. Instructions for connecting and configuring this product for Master/Slave operation are in the User Manual.
Page 4 of 52