Lowrance electronic X105C DF, X100C manual Main Menu

Page 37

Main Menu.

The Main Menu commands and their functions are:

Screen command: changes the contrast or brightness of the display screen.

Sounds command: enables or disables the sounds for key strokes and alarms and sets the alarm style.

Transparency command: adjust the level of transparency for dialogs.

Sonar Alarms command: turns sonar alarms on or off and changes alarm thresholds.

Units of Measure command: changes the depth, speed, distance, or temperature units of measure.

Set Keel Offset command: changes the depth offset of the keel from the transducer.

Calibrate Water Speed command: calibrates the speed measurement.

Reset Water Distance command: resets the log of distance traveled to zero.

Transducer Type command: sets the type of transducer connected to the unit.

Sonar Simulator command: scrolls simulated data on the sonar chart.

Reset Options command: resets all options to factory default settings.

Popup Help command: turns popup help on or off.

Set Language command: chooses which language text appears in.

Software Information command: shows the product name and soft- ware version.

33

Image 37

Contents X100C X105C DF Lowrance Electronics Inc 12000 E. Skelly Dr Tulsa, OK USA Table of Contents Page Read Me First Page How Sonar Works Menu Commands How to use this manual typographical conventionsArrow Keys KeyboardPreparations Transducer InstallationDual-frequency transom installations Single-frequency transom installationsSingle-frequency trolling motor installations Shoot-through hull installationsDeadrise less than Strakes Pad How low should you go?Good location Poor location Location Poor angle Transom Transducer centerline Hull bottom Shoot-thru-hull vs. Transom MountingDot Assembling the bracketTransducerTransducer bracket Ratchet Aligning the transducer on the transomRatchets Drilling mounting holes Assembling the transducerTransom Attaching transducer to transomBottom Hull Flat-bottom hull Deep-vee hull TMB-S bracket Internal tooth washer Bolt Nut Flat washer Trolling Motor Bracket Installation single-frequency onlyPartial fish arches Hulls With Floatation MaterialsTransducer aimed Transducer location High speed Trolling speed Testing Determines Best LocationTrue bottom Second bottom Manual range setting Spread epoxy here Sand this surface Shoot-thru-hull InstallationOptional Speed Sensor Installation Optional Temperature SensorTransom Bottom of hull Good locationPowering a Nmea 2000 Buss Nmea 2000 Power cable Power ConnectionsPowering Your Unit Power Supply cable red and black wires Power connections for the units in this series Nmea 2000 Cable Connections Connecting to a Nmea 2000 NetworkNmea 0183 Cable Connections To Nmea To sonar Network port Units Network SocketMounting the Unit Bracket, In-Dash or Portable Front Bracket Installation173.9 77.1 27.6 137.9 Millimeter 56.9 Inch In-Dash Installation Other AccessoriesPortable Installation Face Cover Keyboard Basic Sonar OperationMain Menu Power/lights on and offMain Menu Pages Page Sonar Page, showing full sonar chart mode Basic Sonar Quick Reference Sonar Operations To adjust sensitivity To Restore Factory Settings Fish Symbols vs. Full Sonar ChartOther Free Training Aids Page To change the ASP level ASP Advanced Signal ProcessingDepth Alarms AlarmsZone Alarm Fish Alarm Calibrate Speed Chart SpeedColorLine Thin or no ColorLine Wider ColorLine Depth CursorCursor line Depth box Depth Range AutomaticDepth Range Manual To switch to Manual Depth RangeDepth Range Upper and Lower Limits To turn Auto Depth Range on againFish arches Area zoomed To change the upper and lower limitsFasTrack Fish I.D. Fish Symbols & DepthsTo turn off upper and lower limits FishTrack To turn the Fish I.D. feature onTo turn on FishTrack Frequency Change Transducer Frequency X105C DF only Symbols with FishTrack depthsTo change the frequency setting to 200 kHz To change the frequency setting to 50 kHzHyperScroll Noise RejectionTo turn off displayed data To change displayed data font size Ping Speed & HyperScrollTo change Ping Speed Reset Water Distance Reset OptionsTo turn off HyperScroll Set Keel Offset Automatic Sensitivity Sensitivity & Auto SensitivityTo adjust sensitivity in manual mode To adjust sensitivity in auto modeTo turn Auto Sensitivity back on Sonar Page & Sonar Chart Display Options Sonar Color ModeTo change the chart mode color scheme Full Sonar ChartDigital Data/Chart Split Zoom Sonar ChartCustomizing the Digital Data/Chart Screen FlashGraf Flasher Sonar SimulatorTo adjust the Surface Clarity level Stop ChartSurface Clarity Zoom & Zoom Bar Upper and Lower LimitsZoom Pan Page Unit freezes, locks up, or operates erratically Unit wont turn onNoise No fish arches when the Fish I.D. feature is offPage Page Supplemental Material Index Page Page Page Lowrance Electronics Full ONE-YEAR Warranty Not toll-free How to Obtain Service…Accessory Ordering Information for all countries Visit our web site