Lowrance electronic X100C, X105C DF manual Upper and Lower Limits, Zoom & Zoom Bar

Page 74

Sonar Features menu with Surface Clarity selected (at left, dual-

frequency menu; at right, single-frequency menu).

2. Press ↓ or ↑ to select clarity levelEXITEXITEXIT.

Surface clutter

In the illustration at left, Surface Clarity is turned off.

The right view shows Surface Clarity set at High.

Upper and Lower Limits

See the entry in this section for Depth Range - Upper and Lower Limits

Zoom & Zoom Bar

"Zooming" the display is a common, fast and easy method used to en- large small detail, fish signals and the bottom with its associated struc- ture. This unit lets you zoom the display quickly and easily by pressing the Zoom In key, ZIN.

Pressing ZIN once doubles the size (2X) of all echoes on the screen. Pressing it again quadruples the size of the echoes (4X). When turned on, the zoom bar on the far right side of the screen shows which echoes will be displayed on the screen when the ZIN key is pressed.

70

Image 74

Contents X100C X105C DF Lowrance Electronics Inc 12000 E. Skelly Dr Tulsa, OK USA Table of Contents Page Read Me First Page How Sonar Works Arrow Keys How to use this manual typographical conventionsMenu Commands KeyboardTransducer Installation PreparationsSingle-frequency trolling motor installations Single-frequency transom installationsDual-frequency transom installations Shoot-through hull installationsGood location Poor location Location Poor angle How low should you go?Deadrise less than Strakes Pad Shoot-thru-hull vs. Transom Mounting Transom Transducer centerline Hull bottomAssembling the bracket DotAligning the transducer on the transom TransducerTransducer bracket RatchetRatchets Assembling the transducer Drilling mounting holesAttaching transducer to transom TransomBottom Hull Flat-bottom hull Deep-vee hull Trolling Motor Bracket Installation single-frequency only TMB-S bracket Internal tooth washer Bolt Nut Flat washerTransducer aimed Hulls With Floatation MaterialsPartial fish arches Testing Determines Best Location Transducer location High speed Trolling speedTrue bottom Second bottom Manual range setting Shoot-thru-hull Installation Spread epoxy here Sand this surfaceOptional Temperature Sensor Optional Speed Sensor InstallationGood location Transom Bottom of hullPower Connections Powering a Nmea 2000 Buss Nmea 2000 Power cablePowering Your Unit Power Supply cable red and black wires Power connections for the units in this series Nmea 0183 Cable Connections Connecting to a Nmea 2000 NetworkNmea 2000 Cable Connections To Nmea To sonar Network port Units Network SocketMounting the Unit Bracket, In-Dash or Portable Bracket Installation Front173.9 77.1 27.6 137.9 Millimeter 56.9 Inch Portable Installation Other AccessoriesIn-Dash Installation Face Cover Basic Sonar Operation KeyboardPower/lights on and off Main MenuMain Menu Pages Page Sonar Page, showing full sonar chart mode Basic Sonar Quick Reference Sonar Operations To adjust sensitivity Fish Symbols vs. Full Sonar Chart To Restore Factory SettingsOther Free Training Aids Page ASP Advanced Signal Processing To change the ASP levelAlarms Depth AlarmsZone Alarm Fish Alarm Chart Speed Calibrate SpeedColorLine Depth Cursor Thin or no ColorLine Wider ColorLineDepth Range Automatic Cursor line Depth boxDepth Range Upper and Lower Limits To switch to Manual Depth RangeDepth Range Manual To turn Auto Depth Range on againTo change the upper and lower limits Fish arches Area zoomedTo turn off upper and lower limits Fish I.D. Fish Symbols & DepthsFasTrack To turn on FishTrack To turn the Fish I.D. feature onFishTrack Symbols with FishTrack depths Frequency Change Transducer Frequency X105C DF onlyHyperScroll To change the frequency setting to 50 kHzTo change the frequency setting to 200 kHz Noise RejectionTo turn off displayed data Ping Speed & HyperScroll To change displayed data font sizeTo change Ping Speed To turn off HyperScroll Reset OptionsReset Water Distance Set Keel Offset Sensitivity & Auto Sensitivity Automatic SensitivityTo turn Auto Sensitivity back on To adjust sensitivity in auto modeTo adjust sensitivity in manual mode To change the chart mode color scheme Sonar Color ModeSonar Page & Sonar Chart Display Options Full Sonar ChartSplit Zoom Sonar Chart Digital Data/ChartCustomizing the Digital Data/Chart Screen FlashGraf Sonar Simulator FlasherSurface Clarity Stop ChartTo adjust the Surface Clarity level Upper and Lower Limits Zoom & Zoom BarZoom Pan Page Unit wont turn on Unit freezes, locks up, or operates erraticallyNo fish arches when the Fish I.D. feature is off NoisePage Page Supplemental Material Index Page Page Page Lowrance Electronics Full ONE-YEAR Warranty How to Obtain Service… Not toll-freeAccessory Ordering Information for all countries Visit our web site