Lowrance electronic X100C manual Fish Symbols vs. Full Sonar Chart, To Restore Factory Settings

Page 44

NOTE:

If you want to change the sensitivity in Manual Mode, first turn off Auto Sensitivity: from the Sonar Page, press MENU↓ to AUTO SENSITIVITYENT↑ to SENSITIVITYENT. Press ↓ or ↑ to pick a different sensitivity setting. When it's set at the desired level, press EXIT.

Important Tip:

While you are experimenting and learning, it's possible to scramble the settings so that the sonar picture disappears from your screen. If that happens, remember that it's easy to switch back to full automatic operation by simply restoring the factory auto settings. Here's how:

To Restore Factory Settings

1.Press MENUMENU↓ to RESET OPTIONSENT.

2.The unit asks if you want to reset all the options. Press ← to YESENT. All options are reset, and the unit reverts back to the Full Sonar Chart.

Fish Symbols vs. Full Sonar Chart

You may have noticed in the quick reference that we used fish arches in full sonar chart mode for our example, and not the popular Fish I.D. fish symbol feature. Here's why.

Fish I.D. is an easier way for a sonar novice to recognize a fishy signal return when he sees it. However, locating fish by symbol only has some limitations.

Your sonar unit's microprocessor is remarkably powerful, but it can be fooled. Some of the echoes calculated to be fish could be tree limbs or tur- tles! To see what's under your boat in maximum detail, we recommend you turn off Fish I.D. and begin learning to interpret fish arches.

Fish I.D. is most handy when you're in another part of the boat or per- forming some task that prevents you from watching the sonar screen. Then, you can turn on Fish I.D. and the audible fish alarm. When that lunker swims under your boat, you'll hear it!

Fish I.D. can also be useful when you want to screen out some of the sonar detail gathered by your unit. For example, in one case fisherman in San Francisco Bay saw clouds of clutter in the water but no fish arches. When a down rigger was pulled up, it brought up several small jellyfish. The fisherman switched their sonar to Fish I.D., which screened out the schools of jellyfish and clearly showed the game fish there as fish symbols.

40

Image 44
Contents X100C X105C DF Lowrance Electronics Inc 12000 E. Skelly Dr Tulsa, OK USA Table of Contents Page Read Me First Page How Sonar Works How to use this manual typographical conventions Menu CommandsArrow Keys KeyboardTransducer Installation PreparationsSingle-frequency transom installations Dual-frequency transom installationsSingle-frequency trolling motor installations Shoot-through hull installationsGood location Poor location Location Poor angle How low should you go?Deadrise less than Strakes Pad Shoot-thru-hull vs. Transom Mounting Transom Transducer centerline Hull bottomAssembling the bracket DotAligning the transducer on the transom TransducerTransducer bracket RatchetRatchets Assembling the transducer Drilling mounting holesAttaching transducer to transom TransomBottom Hull Flat-bottom hull Deep-vee hull Trolling Motor Bracket Installation single-frequency only TMB-S bracket Internal tooth washer Bolt Nut Flat washerTransducer aimed Hulls With Floatation MaterialsPartial fish arches Testing Determines Best Location Transducer location High speed Trolling speedTrue bottom Second bottom Manual range setting Shoot-thru-hull Installation Spread epoxy here Sand this surfaceOptional Temperature Sensor Optional Speed Sensor InstallationGood location Transom Bottom of hullPower Connections Powering a Nmea 2000 Buss Nmea 2000 Power cablePowering Your Unit Power Supply cable red and black wires Power connections for the units in this series Connecting to a Nmea 2000 Network Nmea 2000 Cable ConnectionsNmea 0183 Cable Connections To Nmea To sonar Network port Units Network SocketMounting the Unit Bracket, In-Dash or Portable Bracket Installation Front173.9 77.1 27.6 137.9 Millimeter 56.9 Inch Portable Installation Other AccessoriesIn-Dash Installation Face Cover Basic Sonar Operation KeyboardPower/lights on and off Main MenuMain Menu Pages Page Sonar Page, showing full sonar chart mode Basic Sonar Quick Reference Sonar Operations To adjust sensitivity Fish Symbols vs. Full Sonar Chart To Restore Factory SettingsOther Free Training Aids Page ASP Advanced Signal Processing To change the ASP levelAlarms Depth AlarmsZone Alarm Fish Alarm Chart Speed Calibrate SpeedColorLine Depth Cursor Thin or no ColorLine Wider ColorLineDepth Range Automatic Cursor line Depth boxTo switch to Manual Depth Range Depth Range ManualDepth Range Upper and Lower Limits To turn Auto Depth Range on againTo change the upper and lower limits Fish arches Area zoomedTo turn off upper and lower limits Fish I.D. Fish Symbols & DepthsFasTrack To turn on FishTrack To turn the Fish I.D. feature onFishTrack Symbols with FishTrack depths Frequency Change Transducer Frequency X105C DF onlyTo change the frequency setting to 50 kHz To change the frequency setting to 200 kHzHyperScroll Noise RejectionTo turn off displayed data Ping Speed & HyperScroll To change displayed data font sizeTo change Ping Speed To turn off HyperScroll Reset OptionsReset Water Distance Set Keel Offset Sensitivity & Auto Sensitivity Automatic SensitivityTo turn Auto Sensitivity back on To adjust sensitivity in auto modeTo adjust sensitivity in manual mode Sonar Color Mode Sonar Page & Sonar Chart Display OptionsTo change the chart mode color scheme Full Sonar ChartSplit Zoom Sonar Chart Digital Data/ChartCustomizing the Digital Data/Chart Screen FlashGraf Sonar Simulator FlasherSurface Clarity Stop ChartTo adjust the Surface Clarity level Upper and Lower Limits Zoom & Zoom BarZoom Pan Page Unit wont turn on Unit freezes, locks up, or operates erraticallyNo fish arches when the Fish I.D. feature is off NoisePage Page Supplemental Material Index Page Page Page Lowrance Electronics Full ONE-YEAR Warranty How to Obtain Service… Not toll-freeAccessory Ordering Information for all countries Visit our web site