Furuno B042-008 manual Entering transducer data by transducer model number, Installation main menu

3. INITIAL SETTINGS

Entering transducer data by transducer model number

Note 1: If you are continuing from paragraph 3.1 go to step 2.

Note 2: If you have already entered transducer settings and to reconfirm them turn on the power while pressing any key.

1.Turn on the power.

2.Press any key to show the following menu.

XDCR SELECT INSTALLATION DEMO

XDCR SELECT	: XDCR TYPE
[HIGH]
CONNECTION	: NOT CONNECTED
FREQ	: ---kHz
TRANSDUCER	: ----
TAP	: --
[LOW]
CONNECTION	: NOT CONNECTED
FREQ	: --- kHz
TRANSDUCER	: ----
TAP	: --

POWER REDUCTION : OFF

[-/+]: Change setting, Turn OFF to exit

Installation main menu

Note: XDCR SETTING is set to “XDCR TYPE” at the default setting.

3-3