True MAG

3. INITIAL SETTINGS

Adjustment value =	Actual value - Indication of FCV-1100L
		x 100 (%)

	Actual value

c)Press [!] or ["] to close the dialog box.

10.Press ["] to select SPEED OUTPUT, and then press the [+] or [-] key to open the dialog box.

OFF ON

11.Use [+] or [-] to turn the speed output ON (default setting) or OFF, and press [!] or ["] to close the dialog box.

12.Press ["] to select SPEED INFO, and then press [+] or [-] to open the dialog box.

OFF ON

13.Press [+] or [-] to turn the speed indication (NMEA) OFF (default setting) or ON, and then press [!] or ["] to close the dialog box. If no navigator is connected, turn the [FUNCTION] switch to other position to quit.

14.Press ["] to select NMEA VERSION, and then press [+] or [-] to open the dialog box.

Ver 1.5 Ver 2.0 Ver 3.0 SPECIAL

15.Use [+] or [-] to select NMEA version no. (default setting is Ver 2.0) of the navigator, and then press [!] or ["] to close the dialog box. If you are unsure of the version no., try all three to see which one successfully receives position data. SPECIAL is for use with a navigator whose baud rate is 600 bps.

16.Press ["] to select NAV DATA, and then press [+] or [-] to open the dialog box.

LC LA DECCA GPS DR AUTO

17.Use [+] to select type of navigator connected, and then press [!] or ["] to close the dialog box. AUTO (default setting) selects a navigator in the order of GPS, Loran C, Loran A, Decca, DR (Dead Reckoning).

18.Press ["] to select COURSE, and then press [+] or [-] to open the dialog box.

19.Use [+] or [-] to select TRUE or MAG (magnetic bearing) as appropriate, and then press [!] or ["] to close the dialog box. TRUE is the default setting.

20.Press["] to select TLL (Target latitude, Longitude) OUTPUT, and then press [+] or [-] to open the dialog box.

OFF ON

21.TLL OUTPUT enables or disables output of position data from the video sounder to external equipment, at the moment the [MARKER TLL] key is pressed. Use [+] or [-] to select ON or OFF (default setting) as appropriate, and then press [!] or ["] to close the dialog box.

22.Turn the [FUNCTION] switch to EXIT position to quit.

3-10