5 SETUP
INSTALLING OR REPLACING THE BATTERY
WARNING: Ensure that Pocket Doppler power is off before replacing the battery.
WARNING: Install/replace the battery at least 6 feet (1.5 meters) from the patient.
WARNING: Use only 9V alkaline batteries (IEC Type No. 6LR61/6LF22 or equivalent) in this device.
battery compartment | battery socket |
| |
battery cover | battery connector |
|
battery installation
1.Open the battery compartment: Slide the battery cover in the direction of the arrow on the battery cover (see above picture).
2.If replacing the battery, remove the old battery.
3.A battery connector is located in the battery compart- ment. Attach a new 9V battery to the connector.
4.Install the connected battery in the battery compart- ment.
5.Slide the battery cover back to close the compartment.
sNOTICE: If the Pocket Doppler will not be used for a prolonged period of time, remove the battery from the device.
sNOTICE: Keep the battery away from objects or mate- rials with static electric charges.
| 18 |