Furuno GP-1850D installation manual Output Data Sentences, Input/Output data sentences

3.2 Output Data Sentences

Select output data sentences for external equipment as follows:.

1.Press the [MENU] key.

2.Press the software key labeled "CONFIGURATION".

3.Press the software key labeled "SETUP NMEA PORT 1".

4.Press the software key labeled "SELECT SNTNC." to display the following list.

	SELECT SENTENCE		SELECT
s			SNTNC.
	sAAM
	APB	ON	ON/OFF
	BOD
	BWR
	GGA
	GLL	ON
	MTW
	RMA
	RMB	ON
	RMC	ON
	VTG	ON
	WPL
	XTE
	ZDA	ON
DGPS 3D			RETURN

Figure 3-3 Output Data Sentences Display

5.Select data sentence you want to output by the arrow key.

6.Press the software key labeled "ON/OFF". To output data, set to "ON".

7.Repeat to select other sentences.

8.Press the software key labeled "RETURN".

9.Press the [PLOT] key to finish.

Input/Output data sentences

Port	I/O		Format	Data	Remarks
		•	NMEA-0183		WPL : GP talker only
	Input			TLL*1, DWM, WPL*1, DBT/DPT	NMEA Ver 1.5: DBT
			Ver. 2.0		NMEA Ver 2.0: DPT
1			Ver. 1.5
				AAM, APB, BOD, BWC/BWR,	GREAT CIRCLE: BWC
		•	IEC1162
	Output			GGA, GLL, RMA, RMB, RMC, VTG,	RHUMB LINE: BWR
				WPL, XTE, ZDA, MTW, GTD*2
		•	NMEA-0183		WPL: GP talker only
	Input			TLL*1, DWM, WPL*1, DBT/DPT	NMEA Ver 1.5: DBT
			Ver. 2.0
					NMEA Ver 2.0: DPT
			Ver. 1.5
2
		•	RS232C	AAM, APB, BOD, BWC/BWR,	GREAT CIRCLE: BWC
		•	RTCM104
	Output			GGA, GLL, RMA, RMB, RMC, VTG,
					RHUMB LINE: BWR
				WPL, XTE, ZDA, MTW, GTD*2

*1: Cannot be input consecutively.

*2: Output automatically when LC or LA is selected.

3-3